• 2000 Holzher Quick 1432 CP-B

    $9,995 - Matthews, NC Recently Added
    • Manufacturer: Holz-Her
    • Weight: 1175 Pounds

    2000 holzher , quick  1432 cp-b ,  automatic edgebander this compact holzher edgebander will run tape up to 3mm in thickness. this is a single phase machine. it has been cleaned and checked by a te...

  • WEAN UNITED UNIT A, S/N H-2P150-C

    No price - North Branford, CT
    • Manufacturer: WEAN UNITED

    machine# 10714 still installed and under power in plant manufacturer - wean united year - 1981 oilgear upgrade - 2000 4-post design billet heating - 2 - billet conveyor system ...

  • Savant RVT 100

    $800 - Gaithersburg, MD
    • Manufacturer: Savant

    savant speedvac model rvt100 refrigerated vapor trapsavant refrigerated vapor traps effectively condense and trap a wide variety of solvent vapors that can contaminate and degrade vacuum pump oil. ...

  • Extrude Hone "8/6" Vector Series,1110 PSI Max. Extrusion Pressure,A/B PLC, #41570

    No price - Lincolnshire, IL
    • Manufacturer: Vector
    • Capacity: 628.3 Cu. In.
    • Weight: 5,000 Lbs.

    serial no. r99-1050 new - 1999 specifications: equipped with: allen bradley programmable logic controller (plc), 5 hp hydraulic power pack unit 230/460/3/60 cycle. operating pressure 350-1500 psi....

  • STEELTEK MW-E852-B Heat Exchangers

    No price - Houston, TX
    • Manufacturer: STEELTEK

    mfg. by steeltek; tulsa, ok; 1997; sn: 972-852b; nb #388 & coded; drawings and code papers on file. drawings for this exchanger is in mw-e852-a file.

  • Labconco Purifier

    $3,500 - Gaithersburg, MD
    • Manufacturer: Labconco

    labconco purifier 6 ft. bio safety cabinet class ii type a/b3 w/stand condition: fully rebuilt/very good guarantee: as is warranty: none includes: stand options: uv light fixture  uv...

  • 2000 TOPPER TNL-100A CNC LATHE 2-AXIS WITH FANUC OT-B CONTROL, 2” BAR

    $21,500 - Bethlehem, PA
    • Manufacturer: Fanuc
    • Spindle Bore: 2.4”
    • Spindle Nose: A2-6

    specifications swing diameter: 20.4” swing over saddle: 14.6” turning diameter: 10.4” turning length: 14.8” spindle bore: 2.4” bar capacity: 2” spindle speeds: 4,500 rpm spindle nose: a2-6 turret t...

  • 1987 Cincinnati-Gilbert CNC B-Axis 27064

    No price - Melville, NY
    • Manufacturer: Cincinnati
    • Weight: 13,150 Lbs

    electrics upgraded fanuc red cap ac servo motor compatible with fanuc oimb cnc control fanuc red cap servo drives power clamp auto lube condition: excellent table electrics updated in was connected...

  • ONE USED 48” X 24” WELEX/DAVIS STANDARD SHEET EXTRUSION LINE CONSISTING OF THE FOLLOWING: A

    No price - Elk Grove Village, IL

      one used 48” x 24” welex/davis standard sheet extrusion line consisting of the following a. 2.5” 24:1 l/d welex extruder having an electrically heated water cooled barrel at a 60” centerline height...

    • 100 TON ENERPAC HYDRAULIC H-FRAME PRESS

      No price - Elk Grove Village, IL

        used 100 ton enerpac hydraulic h-frame press floor standing distance between side frames: 35" l-r distance between bed channels: 8.5" f-b distance over bed channels: 17" f-b area of bed: 35" l-r x ...