• 2002 30" Swing 39" Centers Haas SL-30T CNC LATHE, Haas CNC, 10"chk, Tailstock, Chip Auger

    • Manufacturer: Haas
    • Model: SL-30T
    • Distance between Centers: 39"
    • Spindle Nose: A2-6

    haas sl-30t cnc turning center new: 2002 specifications: swing over front apron....................... 30" swing over cross slide....................... 14.5" chuck size................................... 10" sta...

    $27,500
    Harrison, NJ, USA
  • HAAS VF-2 #7136

    • Manufacturer: Haas
    • Model: VF-2

      haas vf-2 vertical 3-axis cnc machining center model: vf-2 s/n: 16906 "1999" specifications: power on time: 13,875 hours cycle start time: 5,392 hours feed cutting time: 4,990 hours travels: x-axis: 30" y-axis: 1...

      No price
      Baltimore, MD, USA
    • 1999 HAAS VF2

      • Manufacturer: Haas
      • Model: VF2

        haas cnc control thru spindle coolant brushless 2 speed geared head rigid tapping 3.5" floppy drive 1 mb memory 30 day return privilege fob md inspect under power. finance $386mo/60 months

        $19,500
        White Marsh, MD, USA
      • 2014 HAAS ST-35Y MULTI-AXIS CNC LATHE TK-20609

        • Manufacturer: Haas

          chuck size: 12″ cutting length without work holding: 23” bar capacity: 4” between centers: 30” x-axis: 12.5″ y-axis: +2.0” z-axis: 23″ rapids on x/y-axis: 472 ipm rapids on z-axis: 945 ipm maximum thrust x-axis: ...

          $84,500
          Bethlehem, PA, USA
        • 2000 HAAS SL-20T CNC Turning Center

          • Manufacturer: Haas
          • Model: SL-20T
          • Spindle Bore: 3.5"
          • Spindle Nose: A2-6

          equipped with: tailstock* 12 position turret* haas cnc control* sludge tank* chip auger * haas technicians have gone through the machine to make sure all is good, any repairs have been done. * running well

          No price
          Indian Trail, NC, USA
        • 1999 HAAS SL-20 CNC Turning Center

          • Manufacturer: Haas
          • Model: SL-20
          • Spindle Bore: 3.5"
          • Spindle Nose: A2-6

          equipped with: 12 position turret* haas cnc control* sludge tank* chip auger* haas technicians have gone through the machine to make sure all is good. any repairs have been done.* running well.

          No price
          Indian Trail, NC, USA
        • HAAS VF3YT/50 CNC Vertical Machining Center 2009

          • Manufacturer: Haas

            haas model vf3yt/50 cnc vertical machining center with 52'' x 23'' table, 40'' x-axis, 26'' y-axis, 25'' z-axis travel, 30 hp, rigid tapping, cat#50, 7500 rpm, 30 atc, remote mpg , sn:1073114, mfg.2009

            No price
            Livonia, MI, USA
          • HAAS VF-10 CNC Vertical Machining Center 1999

            • Manufacturer: Haas

              haas model vf-10 cnc vertical machining center sn 17751, new in 1999, haas cnc control, 120" x 28" table, 120" x 32" x 30" travels, 40 taper, 20 atc, chip auger

              No price
              Livonia, MI, USA
            • 2002 Haas SL-30T CNC Turning Center

              • Manufacturer: Haas
              • Model: SL-30T
              • Distance between Centers: 39″
              • Spindle Nose: A2-6

              tuttet: 12 position | chuck size: 10″ | spindle nose: a2-6 | approx. dims.: 162″ x 77″ x 74″ | spindle motor: 20 hp | machine weight: 16,000 lbs. | rapid traverse: 710 ipm | swing over cross slide: 14.5″ | swing...

              No price
              Spencer, MA, USA
            • HAAS VF-5/50 VERTICAL CNC MILL

              • Manufacturer: Haas

                52" x 23" table 4,000 lb weight capacity travels: x - 50" y - 26" z - 25" 7 -32" spindle to table top 20 hp 5,000 rpm 20 position atc cat 50 coolant thru spindle 4th ready wired 440 volt

                No price
                Wixom, MI, USA