Used haeusler

- 39 listings found
Sort by Price: Low to High | High to Low
  • 1967 HAEUSLER RMSA 2500/8

    • Manufacturer: Haeusler

      control: konventionell | machine no.: 10265 | sheet width: 2500 mm | delivery time: immediatley | freight basis: delivery ex location. | plate thickness: 8 mm

      No price
      Germany
    • Haeusler VRM

      • Manufacturer: Haeusler

        Wa019- type vrm cap.1500mm, roller diameter ca.355mm, four roll mill

        No price
        Amersfoort, Netherlands
      • 2010 4-Roller-Plate-Bending Machine HAEUSLER

        • Manufacturer: Haeusler

          max. plate width: 4.000 mm | bending length by s = 30 mm: x = 3 x s | roll diametertop rollerbottom rollerside roller: 570 mm540 mm450 mm | max. plate thickness by capacity at a yield pointof material 240 n/mm2b...

          No price
          Hünenberg, Switzerland
        • 4-Roller-Plate-Bending Machine HAEUSLER

          • Manufacturer: Haeusler

            bending length: 2,2 x s | max. plate width: 3.000 mm | roll diametertop rollerbottom rollerside roller: 552 mm532,4 mm400 mm | max. plate thickness by capacity at a yield pointof material of 240 n/mm²bending to ...

            No price
            Hünenberg, Switzerland
          • Haeusler Hydraulic Rolling Machine 4 rolls

            • Manufacturer: Haeusler

              Max. thickness: roller drive: hydraulic | useful length: 2040 mm | thickness max.: 8 mm | number of rolls: 4 | Ø lower roller: 220 mm | Ø side rollers: 180 mm | Ø upper roller: 220 mm | arrangement of the rollers...

              No price
              Marlenheim, France
            • Haeusler HPR 12 HAYSAS

              • Manufacturer: Haeusler

                Section bender haeusler hpr 12 haysas number of motorized bending rollers: 3 capacity : - corner Ø 1000: 110 x 110 x 14 mm - t Ø 1200: 120 x 120 x 13 mm - flats on Ø 1000: 100 x 20 x 10 mm - upn Ø 1400: 220 mm - ...

                No price
                France
              • 2001 Haeusler 3 roll plate bender 2000 x 13 mm

                • Manufacturer: Haeusler

                  type: sihrv 10 /3 | power: 7.5 kw | width: 1350 mm | height: 1350/3000 mm | length: 3000 mm | mach-id: 2691 | top roll ø: 250 mm | side rolls ø: 230 mm | bending length: 2050 mm | working speed m/min.: 0- 7 m/m...

                  No price
                  Babberich, Netherlands
                • 2000 Haeusler 4 roll plate bender 4000 x 60 mm

                  • Manufacturer: Haeusler
                  • Capacity: 60 mm

                  type: vrm hy | power: 165 kw | width: 9000 mm | height: 7600 mm | length: 9000 mm | mach-id: 1784 | 3 or 4 roll: 4 roll | top roll ø: 710 mm | side rolls ø: 520 mm | bending length: 4000 mm | bottom roll ø: 640 ...

                  No price
                  Babberich, Netherlands
                • 1975 Haeusler HPR 10-hy-asym-spez

                  • Manufacturer: Haeusler

                    square dia. 500mm: 50x50mm | round bar dia. 600mm: 65mm | angle iron dia. 1000mm: 100x100x11mm | flat iron hard way dia900mm: 90x15mm

                    No price
                    Värnamo, Sweden
                  • Haeusler KRMA 3000/30-50 Bending rolls

                    • Manufacturer: Haeusler

                      Thickness 50 mm x 3000 mm at Ø 570 mm + profile bending on top! + conical bending 2 different upperrolls (Ø 400 & Ø 500) interchangeable additional equipment: 1 reserve roll

                      No price
                      Deinze, Belgium