• HARDINGE HLV #5457

    No price - Baltimore, MD, USA
    • Manufacturer: Hardinge
    • Model: HLV

    hardinge hlv 11" x 18" toolroom lathe model: hlv s/n: hlv-bk-645-3 made in the usa specifications: swing over bed: 11" swing over carriage edge: 9" swing over cross slide: 6 1/2" distance between c...

  • HARDINGE 59 #5361

    No price - Baltimore, MD, USA
    • Manufacturer: Hardinge

    used hardinge 9" x 28" metal lathe model: 59 s/n: 59-16730 specifications: capacity: 9" x 28" swing: 9" bed length: 28" collet capacity: 5-c hardinge spindle taper spindle speeds: (8) 230-3900 rpm ...

  • HARDINGE VBS #784

    No price - Baltimore, MD, USA
    • Manufacturer: Hardinge

    hardinge 36" x 9" vbs second operation lathe model: vbs s/n: v59-3731-3 specifications: spindle capacity: round hardinge 21sc collets: 63/64" hexagon hardinge 21sc collets: 27/32" square hardinge 2...

  • 1966 HARDINGE HC CHUCKER TK-18875

    $5,950 - Bethlehem, PA, USA
    • Manufacturer: Hardinge

    with round 5c hardinge collets: 1-1/16″ with hexagon 5c hardinge collets: 7/8″ with square 5c hardinge collets: 3/4″ with step chucks: 1-1/16″ to 6″ with jaw chucks: 6″ with jaw chucks (through spd...

  • 1986 HARDINGE HC CHUCKER TK-20148

    $11,950 - Bethlehem, PA, USA
    • Manufacturer: Hardinge

    spindle construction: hardinge preloaded ball bearing spindle nose diameter: 2.189″ spindle nose thread: 2-3/16″ – 10 rh maximum fixture diameter: 9″ maximum diameter for threading: 6″ external, 5″...

  • 1996 HARDINGE CONQUEST VMC700 VMC CK-19884

    $12,500 - Bethlehem, PA, USA
    • Manufacturer: Hardinge

    length: 40″ width: 19″ weight on table (max.): 1,650 lbs t-slot size (width x no. x pitch): .688″ x 4 x 3.937″ fixture location keyways (width x no.): .688″ x 3 floor to table surface distance: 33....

  • 2001 HARDINGE VMC800II VMC TK-19514

    $29,500 - Bethlehem, PA, USA
    • Manufacturer: Hardinge

    width: 20.00” length: 36.40” load capacity: 1,540 lbs t-slots (# & size): .708” x 3 x 6.3” taper: 40 speed range: 10,000 rpm transmission: belted motor (cont/peak): 10 /15 hp max torque at base spe...

  • 1991 HARDINGE GT-27SP GANG TOOL CNC LATHE JV-20350TK

    $21,500 - Bethlehem, PA, USA
    • Manufacturer: Hardinge

    x-axis: 12″ z-axis: 11″ x-axis traverse rate:    472 ipm z-axis traverse rate:    630 ipm spindle motor: 5 hp speed range: 60 – 6,000 rpm allowable weight on spindle: 11.259″ 5c spindle work holdin...

  • 1996 HARDINGE CONQUEST T42 CNC LATHE CK-20091

    $22,000 - Bethlehem, PA, USA
    • Manufacturer: Hardinge

    standard: 10 hp torque rating: 42 ft-lb speed range (1-rpm steps): 50 to 5,000 rpm swing diameter over upper way cover: 21.2″ preloaded ball screw diameter: 1.259″ maximum x-axis travel: 5.31″ x-ax...

  • 1999 HARDINGE COBRA 51 CNC LATHE HB-20304

    $21,500 - Bethlehem, PA, USA
    • Manufacturer: Cobra

    horsepower rating (intermittent): 20 hp horsepower rating (continuous): 15 hp torque rating(intermittent): 63 ft-lb @ 1,666 rpm base speed torque rating (continuous): 47.2 ft-lb  1,666 rpm base spe...