Used hbm

- 186 listings found
Sort by Price: Low to High | High to Low
  • 1995 Toshiba BTD-200QE 4″ Bar Table Type HBM

    • Manufacturer: HBM
    • Control: Tosnuc

    Max. table load 5,000 lbs w-axis 27.5″ spindle rpm 10 to 1600 machine dimensions (approx.) 181″ x 226″ x 130″ machine weight (approx.) 36,000 lbs equipped with: tosnuc 732 cnc control rs-232 port multiple program...

    No price
    Richwood, KY, USA
  • 2012 Doosan DBC-130L 5.1″ Bar Table Type CNC HBM

    • Manufacturer: Doosan
    • Control: Fanuc

    Fanuc 31i-a 5 axis control w axis travel 27.6″ max table load 26,455 lbs main motor 35/30 hp equipment: built-in rotary table w .001 degree index heidenhain scales x,y, & z through tool coolant chip conveyor

    No price
    Richwood, KY, USA
  • 1988 Niagara HBM-135-8-10 7038P

    • Manufacturer: Niagara
    • Stroke: 0"- 8"

    - hurco autobend 5c, cnc back gauge - link lite light curtains - dual palm controls on ram - electric foot pedal - horsepower: 25

    $35,000 (USD)
    Painesville, OH, USA
  • Niagara HBM-100-8-10 6717P

    • Manufacturer: Niagara
    • Stroke: 0"- 7"

    - dynabend 3 2 axis cnc back gauge - sdi light curtains - tonnage control valve with gauge - dual palm control on ram - electric foot pedal - horsepower: 20

    $29,500 (USD)
    Painesville, OH, USA
  • 2013 Microcut HBM 110 22724

    • Manufacturer: HBM

      width: 7" | height: 13.5" | length: 21.5" | maximum power: 38 kw | maximum speed: 2000 rpm | spindle taper: #50 taper | flange diameter: 15.75" | reduction ratio: 1:1 | number of bolt holes: 6 | maximum reach to...

      No price
      Melville, NY, USA
    • 2016 Microcut HBM-4 24723

      • Manufacturer: HBM
      • Spindle Diameter: 4.33"

      Fanuc 31i mb cnc control 60 station atc fanuc 31i mb cnc control mpg built-in rotary table hardened & ground ways 60 position automatic tool changer (cat #50) rigid tapping spindle oil chiller spindle vibration s...

      No price
      Melville, NY, USA
    • 2008 Doosan DBC130CX 5.12" HBM

      • Manufacturer: Doosan

        Table size 63" x 70.8" table capacity 33,000 lbs. spindle diameter 5.12'' spindle taper # 50 spindle speed 2500 rpm spindle torque 2,475.2 ft/lbs main motor 40 hp table indexing .001 n/c rotary table x - axis tra...

        No price
        Altamonte Springs, FL, USA
      • 7" Giddings & Lewis HBM, 72" x 96" CSRT, 150" X, 93" Y, #7MT, 3 Axis DRO, 1947

        • Manufacturer: Giddings & Lewis

          Spindle.................7" taper....................7 mt aux spindle..........1-1/2" cross sliding rotary table.............72" x 96" cross travel (x)............................ 150" vertical travel (y)............

          No price
          Helena, AL, USA
        • 2009 Doosan HBM DBC130

          • Manufacturer: Doosan
          • Control: Fanuc 31i

          control: fanuc 31i | table size - l: 63" | table size - w: 74.8" | tool changer type: 40 atc | x - axis travel (inches): 118.1" | y - axis travel (inches): 78.4"

          No price
          Chicago, IL, USA
        • 2015 Doosan DBC 110S 4.3" HBM

          • Manufacturer: Doosan

            Number of pallets 1 table load capacity 15,432 lbs. table size 55'' x 63'' spindle nose to table center 21.6" ~ 68.9" distance spindle nose to table top 0 ~ 59.1" x -axis travel 78.74" y - axis travel 59.1" z- ax...

            No price
            Altamonte Springs, FL, USA