• 1984 Helma HL 120 PDM

    No price - Petershagen, Germany
    • Manufacturer: Helma

    feeding system: mechanically | main engine kw: ca.4 | wight approx. kg: 500 | spindle length mm: 100 | compressed air bar: 6 | power per spindle kw: 2 | positioning spindle hight: hand | tenoning ...

  • HELMA (W. HELMERT Maschinenfabrik, Düsseldorf) UKHM

    No price - Grâce-Hollogne, Belgium
    • Manufacturer: HELMA (W. HELMERT Maschinenfabrik, Düsseldorf)

    creasing machine in cast-iron, 70 cm width foot drive machine originally for perforating but equipped with creasing device instead of perforating comb can work with board up to 2 mm thickness 380 v...

  • Maka,Muti,Helma, Marzani Unterschiedene Stemmer

    No price - Lower Saxony, Germany
    • Manufacturer: Maka

    pakket mortising et al maka db 6, muti omb1, marzani lb1 / pf, helma hgs, rapid msk, muti omb1v. cr 8o2gmyvphu jpabt

  • Copying router Helma OFS 4 GDM 34

    No price - Barntrup, Germany

      copying router helmatype: ofs 4 gdm 34year of manufacture: 1984 throughfeed working left and right each side 2 router motors and 2 sanding motorsoverall input power: 35 kwwith material return trans...

    • Tenoner circumferential HELMA

      $2,573 - Miechucino, Poland

        tenoner circumferential helma - the diameter of the main spindle 30 mm - speed ​​main spindle 9000 / min - main motor power of 4 kw - two-station - automatic movement table - adjusting the angle of...

      • 1987 HELMA MHL

        No price - Kortrijk, Belgium
        • Manufacturer: HELMA

        double sided multiple mortiser equipment each side: 4+4 horizontal units, 1 of these with twin spindle 3+3 vertical units max. centerdistance between hor. units: 1400 mm (150 mm for the twin unit) ...

      • COPY SHAPER MACHINE Type HELMA

        No price - Como, Italy

          copy shaper machine helma type f40. automatic max. working width mm. 360 max. working heigth mm. 90 feed: from 1 to 8 mt./min. (automatic or pedal variation) n.02 router shaft diam. mm.30 n.02 rout...

        • HELMA HL 100 D SLOT MORTISER [MO-010486]

          $5,950 - United States
          • Manufacturer: HELMA

          helma hl 100d twin table mortisertwin table double sided automatic oscillating slot mortiser -- (2) tilting (up to 20ø) to the left or right and adjustable worktables, twin pneumatic holddown c...

        • HELMA CF 40 Copy milling machine with transport belt

          No price - Netherlands
          • Manufacturer: HELMA

          copy milling machine with workpiece returning make helma type: cf-40 2 milling spindles maximum distance between the spindles from center to center 450 mm maximum distance between the feed shaft ...

        • Helma Hand lathe

          No price - Hesse, Germany
          • Manufacturer: Helma

          height of over bed: 200 mm height above sweep: 280 mm turning length: 1500 mm overall length: 2400 mm tailstock: mt 3 engine data: 1.5 kw, 1400 rpm /. u8b8ew grjn