• Reducer, Gear Box, 40.2 HP, 56.3:1, Horsburgh & Scott,

    No price - San Dimas, CA, USA

      reducer, gear box, 40.2 hp, manufactured by horsburgh and scott. unit is a size ld3200h parallel feed and discharge with a ratio of 56.3:1. unit rated at 1750 rpm input. gear box has service fac...

    • HORSBURGH & SCOTT 2-Speed Gear Reducer #2679

      No price - Perrysburg, OH, USA
      • Manufacturer: HORSBURGH & SCOTT

      ratio: 1.17 & 2.02 | hp rating: 87 | input rpm: 850 | service factor: 1.0 | overall dimension: 2′ x 2′ x 1’6″ | approximate weight: 350 lbs.

    • FENN POWERED TURKSHEAD MODEL 61P

      No price - Ivyland, PA, USA
      • Manufacturer: FENN

      roll size: 3/4" x 6 1/4" | drive motor: 1.5/15/15 hp dc 120/1150/3450 rpm 56 amps 50/240/240 volts type tr serial # t28p14and frame 288atcz | reducer-horsburgh & scott wormgear: size 5" w 26 seria...

    • 20 Cubic Foot Patterson Double Cone Dryer #73979

      No price - West Windsor Township, NJ, USA Recently Added

        20.3 cu ft working capacity 316ss patterson double cone vac dryer. sn 58211g. int rated full vac @ 300 deg f, jkt rated 40 psi/full vac @ 300 deg f. 48" dia. cs jkt. 16" charge port w/cover, 8" dis...

      • 25" (635mm) WATERBURY FARREL ZR 23-25 SENDZIMIR MILL w/AGC

        No price - Newark, NJ, USA
        • Manufacturer: Sendzimir
        • Weight: 15,000 LBS. (6800 KG)

        specifications: manufacturer: waterbury farrel foundry & machine (usa) type: 20-hi precision cold reversing rolling mill ...

      • FENN TWO-HIGH 8" X 4" ROLLING MILL

        No price - Newark, NJ, USA
          • Capacity: 1000 POUNDS (454 KILOS)

          specifications: roll size: 8" x 4" (203.2mm x 101.6mm with 2" (50.8mm) wide shell roll bearings: fenn caged rollers mill stand cross section: 5" x 5" (127mm x 127mm) mill stand window: 8.5" x 17...

        • 4 Diameter Inch Extruder #71999

          No price - West Windsor Township, NJ, USA Recently Added

            3.94" (100mm) baker perkins pc100 poly-con continuous reactor twin screw extruder. machine #56706, order #wo4279, contract #m90774. barrel 9:1 l/d ratio w/3" dia discharge. feed to poly-con is by 3...

          • 162 " Dia Whiting Mfg. Calciner

            No price - Red Bank, NJ, USA
            • Manufacturer: Whiting Mfg.

            used 13' 6" diameter x 90' length whiting rotary calciner. available with (additional cost) two buell dust collectors / cyclones. the calciners were originally coal fired via detroit stoker equip...

          • 30,000# x 55" Loopco Recoiler. Ref # 9989-HK

            No price - Toledo, OH, USA
            • Manufacturer: Loopco

            loopco recoiler -20" dia. drum -55.5" face gripper bar -57.25" face drum -dual direction gripper -power clamp and expansion -hydraulic pushoff -holddown roll -sliding base -horsburgh & scott reduce...

          • Loopco #15100A

            No price - Monclova, OH, USA
            • Manufacturer: Loopco

            model #:  n/a serial #: n/a 20″ diameter drum 55.5″ face gripper bar 57.25″ face drum dual direction gripper power clamp and expansion hydraulic push off hold down roll sliding base horsburgh & sco...