• 1996 Priess und Horstmann BAT-III-CNC

    No price - Petershagen, Germany
    • Manufacturer: BAT

    control: b & r + pc | fog station: yes | ribbon bore: yes | handle holes: yes | 3 axis control: 3 | online connection: possible | machining stations: 2 | automatic setting up: yes | puffer drill a...

  • 2003 Priess und Horstmann BAT-RTW-CNC

    No price - Petershagen, Germany
    • Manufacturer: BAT

    control: nst panel pc w2k | program: ferro can bus | fog station: yes | ribbon bore: yes | handle holes: yes | drilling for:: yes | robot feeding: yes | 3 axis control: yes | transfer station: yes...

  • Horstmann Antriebstechnik HD 541 Statomat

    No price - Petershagen, Germany
    • Manufacturer: Horstmann Antriebstechnik
  • 1995 Horstmann LVP / waste sorting

    $203,736 - Warngau, Germany
    • Manufacturer: Horstmann

    big lvp / waste sorting type horstmann. consisting of 2 x feed hopper, drum screen, 4 x sorting cabins, 2 x metal separator, about 16 conveyor belts, gassmann fördermat, gassmann sackaufreiser. sa...

  • 1994 Priess und Horstmann Frontenbohrautomat BAT III

    No price - Petershagen, Germany
    • Manufacturer: BAT

    control: priess und horstmann | freetext: machine for hettich hardware / buffer setting machine | cycle rate: 400 | power kw 2: 2.2 | sawing unit: 1.6 kw | rpm min-max 2: 18000 | 3 axis control: 3...

  • 1993 Priess und Horstmann KP-CNC

    No price - Petershagen, Germany
    • Manufacturer: Priess und Horstmann

    machine rigging: automatically | floors and sides: yes | cylinder vertical: 3 | compressed air bar: 6 | high / low pressure: yes | pre-assembling conveyor: no | hydraulical / pneumatical: yes | bo...

  • 1999 Priess und Horstmann BAT DTW CNC

    No price - Petershagen, Germany
    • Manufacturer: BAT

    working range x: 300 - 2500 | working range for: 16-32 | automatic setting up: yes | working range y-axis: 150-800

  • 2001 Priess und Horstmann BAT DTW CNC Drilling and assembly equipment

    No price - Lower Saxony, Germany
    • Manufacturer: BAT

    for the commission-driven drilling and pressing of hinges as well as drilling of handle and lock holes and indentations for special fittings and additional bores up and down at doors. workpiece di...

  • 1999 Priess u. Horstmann BAT-DTW- CNC Boring and assembly line

    No price - Georgsmarienhütte, Germany
    • Manufacturer: BAT

    priess u. horstmann drilling and assembly line yop for the customized drilling and dowelling of side and bottom panels in longitudinal through feed consisting of pos. 1 gantry feeding plant type pb...

  • 1989 Kearns-Richards NC100

    No price - Washington, PA, USA
    • Manufacturer: Kearns-Richards
    • Control: New CNC

    optional horstmann 48 inch (1200mm) 360,000 position full contouring rotary and 100,000 position full contouring tilt axis: y-axis travel above rotary tilting table 48 inch ( 1200 mm), or 42 inch (...