Used hydrobar

- 110 listings found
Sort by Price: Low to High | High to Low
  • 1997 LNS SUPER HYDROBAR Auto. Bar Feeder

    • Manufacturer: LNS

      Bar diameter 5/16" - 2-3/4" maximum bar length 17.7 ft. number of tubes 6

      No price
      Wisconsin, United States
    • LNS 3.20 HS-3.3 SUPER HYDROBAR BAR FEED

      • Manufacturer: LNS

        Equipped with: three turret f.l.a: 5 | income voltage: 200-230v/60hz/3 phase | control voltage: 24v

        No price
        Ivyland, PA, USA
      • 1988 1.625" Dia. 12 Length LNS Hydrobar 6.42HS-5.2 BAR FEED, With Hydraulic Tank and Stands

        • Manufacturer: LNS

          Lns 6.42 hs-5.2 hydrobar barfeed, s/n: 30.204 consists of six (6) guide tubes with internal diameters of: 1.732" for 1-1/2" to 1-5/8" diameter barstock 1.575" for 1-1/4" to 1-1/2" diameter barstock 1.339" for 1" ...

          No price
          Harrison, NJ, USA
        • 1/16 - 1" X 12' LNS HYS 6.26 HS-3.3 SUPER HYDROBAR 395386

          • Manufacturer: LNS

            1/16 - 1" x 12' lns hys 6.26 hs-3.3, super hydrobar, 6-tube gatling type bar consists of six (6) guide tubes with internal diameters of: 1.063" for 7/8" to 1" diameter barstock .945" for 3/4" to 7/8" diame...

            No price
            Longmont, CO, USA
          • LNS Super Hydrobar Series Bar Feeds for Fixed and Sliding Headstock NEW 314916

            • Manufacturer: LNS

              Lns super hydrobar series bar feeds for fixed and sliding headstock, new general specification per brochure the super hydrobar hs is a manual barfeeder for small, and medium production runs. the diameter range is...

              No price
              Longmont, CO, USA
            • LNS HYDROBAR 6.42-HS-5.2

              • Manufacturer: LNS
                No price
                Madrid, Spain
              • 1995 Tsugami S25D 6433

                • Manufacturer: Tsugami

                  chuck type: collet | spindle motor: 8 | spindle speed: 6,300 | control make/model: fanuc control w/sub spindle chuck button | second spindle motor: 2.9 | second spindle speed: 4000 | barfeeder make / model: supe...

                  No price
                  Maitland, FL, USA
                • LNS HYDROBAR HYS loader 3.28

                  • Manufacturer: LNS

                    Used

                    $3,540 (USD)
                    Lombardy, Italy
                  • 2008 Hardinge Elite 42MS 6443

                    • Manufacturer: Hardinge
                    • Spindle Nose: A2-5

                    c-axis: yes | chuck type: collet | spindle nose: a2-5 | spindle motor: 15 | spindle speed: 6,000 | rapid traverse: 1181 | tool positions: 12 | turret options: turret tooling vdi 30
                    | control options: rigi...

                    No price
                    Maitland, FL, USA
                  • No price
                    Deinze, Belgium