- Manufacturer: Advanced Bulk Hopper
stainless loading hopper for use with pneumatic conveying system by advanced bulk and conveying, (greenville pa) features 316l stainless steel food grade construction 36" diameter x 30" deep with 60? cone bottom ...
- Manufacturer: INTAKE HOPPER
6.0m x 3.0m intake hopper with belt discharge variable speed drive. 15.0kw 3ph 4pole motor good condition heavy duty
- Manufacturer: SKANDIA KTG
bottom intake conveyor 60tph 18m 20cm long 5m 50cm of inlet hopper sections solid floor throughout 1x 600mm curve section 7.5kw 3ph 4pole motor good condition
- Manufacturer: Torit
1-1/2 hp motor, 220/440 volt, 3 phase (2) 3-3/4" diameter intakes 4-1/2" x 7-3/4" rectagular exhaust hopper base with 6-1/2" dia. valve
- Manufacturer: Karl Klement Kwik- Sort
all stainless steel "kwik-sort" random bottle unscrambler by karl klement co. ltd. (markham, ont), model kk 10 s, serial # 86004. features all stainless steel pharmaceutical grade construction, bottle feed elevat...
- Manufacturer: CARIER C8/60
carier c8/60 conveyor 60tph 14ft long galvanised intake conveyor built in intake hopper on tail section only recently done 1.1kw 3ph 4pole motor good condition
- Manufacturer: Jeantil
country: france | division: farm equipment | attachments: semi-door, bi-speed housing, electric cabin control, 1 remover, side chute, flour intake hopper, nut and carpet tree change, signaling, awning arm releva...
- Manufacturer: Briri
1-axis güllewagen, volume: 7000 liters, brakes, distributor: impact plate, vacuum pump obenanhängung, intake manifold: front left, without abe,, tires (v): 23.1-26, condition-tire (v): 30
- Manufacturer: Briri
vacuum tandem slurry tankers, volume: 10 cbm, suspension, steering axis (schmitz handlebar) compressed air brake 2 circuit, intake manifold: front right + left, back left, exactly distribution, weitwinkelgelenkwe...
- Manufacturer: Benken
deichselfederung, rotocut cutting unit rc 5000m bj 2003, intake right / left, 3-way cock drainage + suction at the rear, mudguard, birdsong rods, 2x24 exhausts exa cut swing up in fixed attachment, adr axles, hyd...
stainless steel inclined belt elevator with rubber belt. the belt is 8" wide with 1.5" high flights every 5.5". the conveyor is 50" long from top to bottom. elevator has an intake height of 37" with a discharge h...
- Manufacturer: Aec, Inc.
used approximate 90 cubic foot (680 gallon) stainless steel hopper, includes aec vacuum loader hopper with 2.5" intake, 26" x 39" side door, has 6" output diameter with 6" gate valve. cone bottom, flat top, does ...
- Manufacturer: CARIER HOPPER
reasonable condition 10'x 8'hopper 20ft conveyor 4.0kw 3ph 4pole motor
Get email updates for intake hopper