• IPR Table Press Tooling Inspection Unit, Model APF-0602

    • Manufacturer: IPR

      used ipr tablet press tooling inspection unit, type tias, model apf-0602 with computer, serial# 00tia62-wapr. as is.

      No price
      Cleveland, OH, USA
    • 45" x 160" cc POREBA TR-115 62373

      • Manufacturer: Poreba
      • Distance between Centers: 160"
      • Spindle Nose: A1-15" AMERICAN STANDARD

      45" x 160 poreba tr-115b2/4m heavy duty engine lathe new: 1992 specifications: swing over bed ways ................... 45-1/4" swing over cross slide ................ 33-1/2" swing in gap ...........................

      No price
      Huntington, NY, USA
    • 2008 Broadbent Stanley UK LC40x3000mm 27805

      • Manufacturer: Stanley
      • Spindle Bore: 13.779"
      • Spindle Nose: A2-11

      fanuc 18i-tb cnc control 13.779" spindle bore front & rear chucks fanuc 18i-tb cnc control with 10.4" lcd monitor 31.496" front & rear 4-jaw chucks powered tailstock (1) 1.18" - 15.74" steady rest manual guide wi...

      No price
      Melville, NY, USA
    • 2000 Giddings & Lewis Davis 23429

      • Manufacturer: Giddings & Lewis
      • Weight: 1800 lbs

      serial number: 307-90174-00 54" facing diameter boring bar & holder drive ring boring bar & holder storage crate located in our philadelphia, pa warehouse

      No price
      Melville, NY, USA
    • Chicago Initial Pinch Hydraulic Plate Roll #2880

      • Manufacturer: Chicago

        new chicago initial pinch hydraulic plate roll model lh ipr 5060 capacity........................... 5 ft. x 16 ga. mild steel roll diameter...................... 3.10 in. weight............................. 2,10...

        No price
        Ronkonkoma, NY, USA
      • 1988 Okuma LB-15 CNC Lathe

        • Manufacturer: Okuma
        • Spindle Bore: 1.77″
        • Distance between Centers: 20.48″

        osp-5020l cnc control 8″ 3-jaw chuck 12-position turret tailstock chip conveyor all available manuals

        No price
        Spencer, MA, USA
      • 5" TOSHIBA BFT-13C-W2 1977,98" X 58991

        • Manufacturer: Toshiba

          5.12" toshiba bft-13c-w2 table type horizontal boring mill new: 1977 diameter of spindle .................. 5.12" taper in spindle ..................... #50 diameter of milling quill ............ 8.86" spindle lo...

          No price
          Huntington, NY, USA
        • LANSING-G-28 28/37"SWING 2537

            • Spindle Bore: 9 1/4"
            • Distance between Centers: 120"

            lansing g-28 hollow spindle engine lathe swing over bed....................... 28" swing in gap......................... 37 3/4" length of gap........................ 17" swing over cross slide............... 18 ...

            No price
            Deer Park, NY, USA
          • 24" Solberga Geared Head Drill Press

            • Manufacturer: Solberga
            • Capacity: 1.75"

            motor: 2-hp | spindle travel: 7.785" | depth of throat: 13" | spindle diameter: 3.125" | spindle feeds (4): .004/.008/.012/.016 ipr | spindle speeds (8): 48-1584 rpm | distance spindle to base: 35" - 49.5" | ver...

            No price
            Farmingdale, NY, USA
          • Bridgeport Series I Ram-Type Vertical Milling Machine

            • Manufacturer: Bridgeport
            • Model: SERIES I
            • Spindle Taper: R8

            equipped with: newall 2-axis digital readout, longitudinal power feed, head tilt / swivel, coolant in base, chrome knee ways, 1-shot lube

            No price
            Farmingdale, NY, USA

          Have 5 seconds to help us improve the results?

          I'll do it
          No thanks