• 1997 Homag KL 76 A3/S2

    $35,000 - Matthews, NC Recently Added
    • Manufacturer: Homag
    • Weight: 9700 Pounds

    1997 homag , kl 76 a3/s2 , edge bander | premilling & corner rounding premilling & corner rounding cleaned and checked! specs edgebanding thickness  0.3mm to 3mm panel thickness  12mm to 60mm feed ...

  • 2000 Homag KL-78/A20/S2

    $34,900 - Matthews, NC Recently Added
    • Manufacturer: Homag
    • Weight: 12575 Pounds

    2000 homag , kl 78/a20/s2 , edgebander | premill and corner round this homag kl 78 heavy duty edgebander has it all! pre-milling, two (2) top and bottom trim units, four (4) motor corner rounder, p...

  • 2016 Woods KLS

    $2,899 - Chambersburg, PA
    • Manufacturer: Woods

    new woods kinetic log splitter, 2-second cycle time is up to 6x faster than hydraulic 20 - 40 ton log splitters, no hydraulic fluid or parts – easy to maintain, uses less fuel than hydraulic splitt...

  • 2016 Woods KLS

    $2,899 - Chambersburg, PA
    • Manufacturer: Woods

    new woods kinetic log splitter, 2-second cycle time is up to 6x faster than hydraulic 20 - 40 ton log splitters, two 18-1/2" 70 lb. flywheels, 6.5 hp kohler engine, 4" x 8" road towable tires, 2" b...

  • 2001 HOMAG OPTIMAT KL 78/A20/S2

    No price - Matthews, NC Recently Added
    • Manufacturer: Homag

    homag kl78/a20/s2  edgebander (2001) panel @length; 1)  minimum of 55mm long with thickness of 22 mm 2) minimum of 100mm long with thickness of 60 mm panel @height;  12mm min. -  60mm max. edgeband...

  • 2002 HOMAG KL 79/2/E20

    $125,000 - Matthews, NC Recently Added
    • Manufacturer: Homag

    this single sided softformer/bander has never been put into production. it is a 2002, but it is new banding from .4 to 3mm from coils and up to 20mm with strips for panels 7 to 60mm thick minimum p...

  • CONSOLIDATED ROTARY COTTONER, MODEL KL-4-TB

    No price - Cleveland, OH Recently Added
    • Manufacturer: Consolidated

    one (1) used consolidated rotary cottoner, model kl-4-tb, 4 head, pressently set up for 30 cc bottles, serial# 4354.

  • Tume Kl 250

    $746 - Närpes, Finland Recently Added
    • Manufacturer: Tume

    tank capacity: 1 l working width: 2,5 m working width: 2.5 m

  • 107.64 Sq Ft Schenk ZHF-SR-10-KL Stainless Steel Pressure Leaf Filter 3378

    No price - Red Bank, NJ
    • Manufacturer: Schenk

    schenk centrifugal discharge pressure filter, model zhf-sr-10-kl, stainless steel construction, 9.87 square meter surface area, .3 cu. liter cake capacity, rated 75 psi at 212 degrees f internal, b...

  • KENT USA MODEL KLS-2660N CNC ECONOMY LATHE - NEW

    No price - Bannockburn, IL
    • Manufacturer: Kent

    kent usa kls-2660n cnc economy lathe - new product features 7.5 hp ac servo spindle motor big 4” plus spindle through hole rigid fc30 castings with extra ribbing induction hardened and ground ways ...