• Used 1.5" Killion Extruder, 30:1, Vented, 25 Hp

    No price - Elk Grove Village, IL, USA Recently Added
    • Manufacturer: Killion

    used 1.5" killion extruder, 30:1, air cooled, vented, 25 hp ac motor with abb drive, 5 barrel zones, top vent at approximately 28" from feed, amp meters for each heat zone, koellmann gear box, 16:1...

  • 2" American Kuhne Extruder, Model AK200, 24:1, 20 Hp

    No price - Elk Grove Village, IL, USA Recently Added
    • Manufacturer: American

    2" american kuhne extruder, model ak200, 24:1, 20 hp marathon blue max ac motor air cooled barrel, 4 barrel zones, barber-colman temperature controls, 2 die zones, solid state relays, rpm readout, ...

  • MPM / Scheer Lab Pelletizing Line

    No price - Elk Grove Village, IL, USA Recently Added
    • Manufacturer: Scheer

    mpm / scheer bay pelletizing line line consists of the following pieces: 1.5" mpm extruder, 24:1 l/d ratio, 15 hp marathon xri ac motor with allen bradley ac inverter drive, 11.39: 1 koellmann gear...

  • 2" KILLION EXTRUDER, 24:1 L/D, 25 HP

    No price - Cleveland, OH, USA
    • Manufacturer: Killion

    one (1) used 2" killion single screw extruder, 24:1 l/d, electrically heated, air cooled barrel, jacketed feed throat, 25 hp dc motor with scr, thru koellmann gear box with 9.457:1 ratio, control p...

  • 2.5" FARREL DUMP EXTRUDER, 16:1 ;/D

    No price - Cleveland, OH, USA
    • Manufacturer: Farrel

    one (1) used 2.5" farrel single screw extruder, approximate 16:1 l/d ratio, electrically heated, air cooled non-vented 3 zone barrel, no blowers, water cooled feed throat with ram feed, approximate...

  • AMERICAN KUHNE MODEL AK800-WK-EXT 8″ EXTRUDER

    No price - Elk Grove Village, IL, USA Recently Added
    • Manufacturer: American

    american kuhne model ak800-wk-ext 8″ extruder, s/n 1952, 30:1 l/d electrically heated water cooled (closed loop) non-vented barrel. gearbox is a koellmann model unex 10.3/6/kg rated at 400 hp at 11...

  • AMERICAN KUHNE AK800-WK-EXT 8″ EXTRUDER 15036

    No price - Elk Grove Village, IL, USA Recently Added
    • Manufacturer: American

    american kuhne model ak800-wk-ext 8″ extruder, s/n 1952, 30:1 l/d electrically heated water cooled (closed loop) non-vented barrel. gearbox is a koellmann model unex 10.3/6/kg rated at 400 hp at 11...

  • ONE USED 48” X 24” WELEX/DAVIS STANDARD SHEET EXTRUSION LINE CONSISTING OF THE FOLLOWING: A

    No price - Elk Grove Village, IL, USA

      one used 48” x 24” welex/davis standard sheet extrusion line consisting of the following a. 2.5” 24:1 l/d welex extruder having an electrically heated water cooled barrel at a 60” centerline height...

    • CINCINNATI MILICRON (MANUFACTURED BY WELEX) 2 ROLL STACK/LAMINATOR

      No price - Elk Grove Village, IL, USA
      • Manufacturer: Cincinnati

      cincinnati milicron (manufactured by welex) 2 roll stack/laminator, no s/n, two cored for cooling chrome rolls 17.75″ diameter x 34″ wide, two aluminum guide rolls, one 17.75″ diameter x 31″ wide a...

    • CINCINNATI MILICRON ( WELEX) 2 6547

      No price - Elk Grove Village, IL, USA Recently Added
      • Manufacturer: Cincinnati

      cincinnati milicron (manufactured by welex) 2 roll stack/laminator, no s/n, two cored for cooling chrome rolls 17.75″ diameter x 34″ wide, two aluminum guide rolls, one 17.75″ diameter x 31″ wide a...