• Komo 3-Axis Twin Spindle - Fixed Bridge CNC Router - Model: VR512

    • Manufacturer: KOMOn/aL-1-2701999VR512RC160000438CLEANED/CHECKEDKomo

      used komo 3-axis twin spindle fixed bridge cnc router - model: vr512 this used 3-axis twin spindle fixed bridge cnc router, manufactured by komo, features two 8 position 2 x 16 hp spindles tool changer. technical...

      $89,900 (USD)
      Auburn, GA, USA
    • KOMO VMC 40/180

      • Manufacturer: Caterpillar
      • Spindle Taper: Cat 40
      • Control: Fanuc 16M

      coolant system splash guards control: fanuc 16m | spindle speed: 6,000 rpm | table size - l: 180" | table size - w: 24" | tool changer type: 30 atc | spindle motor (hp): 12 hp | spindle taper (cat/bt): cat 40 | x...

      No price
      Chicago, IL, USA
    • 1995 Komo VMC 50/120 Fanuc 0M

      • Manufacturer: Fanuc
      • Spindle Taper: CAT #50

      equipment: chip conveyor- full length hennig high torque gear reduction rs 232 port interface full enclosure guarding hand held manual pulse generator wired 208/240v electrics all available manuals | table si...

      No price
      Dundee, FL, USA
    • 2006 Komo VR-530TG MACH III 36311

      • Manufacturer: Komo

        (1) used komo model vr530 tg mach iii 3 spindle cnc routernew approx 2006specifications:equipped with:fanuc 180i controldrilled & tapped fixture plateadditional 5' of table with 60" of x axis travel available

        No price
        Los Angeles, CA, USA
      • Komo VR508 CNC Router (Used)

        • Manufacturer: Komo

          komo vr-508, fanuc 0mc, 2 spindles, 5' x 8', 97"x, 61"y, 6"z, 12 hp, 1996

          $18,500 (USD)
          United States
        • 1999 KOMO INNOVA 510 CNC ROUTER W/ATC [RL-010661]

          • Manufacturer: ATC

            komo innova 510 with atc and only 4,776 hours:60" x 120" heavy duty fixed bridge, moving table machine in a front-to-back configuration, machined 2" thick solid cast aluminum, single zone vacuum table. -- equipp...

            $29,900 (USD)
            United States
          • Komo 2007 Solution VR 510 TG CNC router with low hours

            • Manufacturer: Komo

              -one (1) four-pole, 18hp (13.5kw), 24,000 rpm, hsk 63f, fan-cooled spindle-table: 60" x 120" (1524 x 3048mm)-12 position automatic tool changer with aggregate capability: 3.25" (82mm) positions full & 6.5" (165mm...

              $72,980 (USD)
              United States
            • 2002 KOMO VR 512 MACH ONE S CNC ROUTER (ATC & BORING) [RC-012086]

              • Manufacturer: ATC

                komo vr 512 mach one s with atc & boring; only 6,152 hours:machine will be available once new machine is ordered60" x 144" moving table, heavy duty fixed bridge machine, front-to-back configuration, 2" thick soli...

                $54,900 (USD)
                United States
              • 2000 KOMO MACH ONE 508 CNC ROUTER (ATC & BORING) [RC-012071]

                • Manufacturer: ATC

                  komo 508 mach i with atc and boring available in january 2017:60" x 96" moving table design in a front-to-back configuration with a single zone vacuum table machined out of solid cast aluminum, (3) pop-up pins fo...

                  $34,900 (USD)
                  United States
                • 1996 KOMO VR 508 CNC ROUTER [RL-280153]

                  • Manufacturer: KOMO

                    komo vr 508ãƒâ·60" x 96" moving table with (2) 48" x 60" or vacuum zones, 2" thick solid cast aluminum plate, machined vacuum table w/ground surface finish, extra heavy duty fixed gantry bridge. -- equipped with...

                    $19,900 (USD)
                    United States

                  Have 5 seconds to help us improve the results?

                  I'll do it
                  No thanks