• KO lee 2 AXis Hydraulic Feed Tool & Cutter Grinder

    • Manufacturer: Lee
    • Weight: 1300 lbs

    machine specs: swing over table: 12-1/4" distance between tailstocks: 32" table working surface: 5-1/4" x 37-1/4" longitudinal table travel: 20" table travel per rev. of handwheel: 9/16" - 2-13/16" cross feed of ...

    $8,950 (USD)
    Livingston, NJ, USA
  • KO DT698

    • Manufacturer: KO

      kongskilde overum dt698 6', semi-mount, appearance 7.5

      $7,916 (USD)
      Exeter, Canada
    • 1999 KO DTL6108H

      • Manufacturer: KO

        1999, kongskilde dtl 611 overum 6 furrow hyd reset, appearance 7.5

        $16,656 (USD)
        Exeter, Canada
      • KO LEE, No. BA960, 1989, Distance between tailstock 22", distance workhead center to tailstock 16"

        • Manufacturer: Lee

          specifications: distance between tailstocks - 22" distance workhead center to tailstock - 16" table working surface - 5-1/4" x 27-1/4" total crossfeed movement - 7-1/4" table traverse - 14" vertical movement of c...

          No price
          Longview, TX, USA
        • Used-Westfalia KO-2006 Solid Bowl Disc Centrifuge, 316 Stainless Steel. Maximum bowl speed 8500 rpm

          • Manufacturer: Westfalia

            24546002 used-westfalia ko-2006 solid bowl disc centrifuge, 316 stainless steel. maximum bowl speed 8500 rpm. motor approximately 2 hp/1 kw-380 volt/50 cycle/3 ph xp. flanged driven motor. (missing bowl, centripe...

            No price
            Bensenville, IL, USA
          • 5/16" NATIONAL MODEL 56 2-DIE 3-BLOW COLD HEADER

            • Manufacturer: National

              equipped with: trim pko die relief electrics: 440 v / 3 /60 | maximum diameter: 5/16" | maximum 1st die ko: 4-1/2" | maximum 2nd die ko: 2-1/2" | maximum production: 150 ppm | maximum cutoff length: 3"

              No price
              Ivyland, PA, USA
            • 1998 Van Dorn Demag - 1500HP-260 (1998) - 1500 Ton, 260 oz. Van Dorn Injection Molding Machine

              • Manufacturer: Demag
              • Screw Diameter: 135mm

              note: under power; not available until october | control: pathfinder 5000 | options: core pull, hydraulic ko | tonnage: 1500 | voltage: 460/3/60 | shot size: 260 oz. | platen size: 76" x 76" | clamp stroke: 60" ...

              No price
              Worcester, MA, USA
            • 2007 KO 53229 KO-427-03

              • Manufacturer: КО
              • Mileage: 71530

              garbage truck ko-427-03 on chassis kamaz 53229 high degree of compaction of garbage (up to 6), allowing to load into the body depending on its capacity and the initial density of solid domestic waste from 70 to 1...

              $17,808 (USD)
              Dzerzhinsky, Russia
            • 2006 KO HD 78 KO-522G

              • Manufacturer: КО

                the vacuum machine ko-522g is designed for vacuum sampling, transportation and discharge of liquid waste that does not contain explosive and combustible substances. special equipment consists of a cistern, a vacu...

                $14,280 (USD)
                Dzerzhinsky, Russia
              • AL-KO Mobil Jet 250

                • Manufacturer: JET Tools

                  al-ko dust collection system, type mobil jet 250, built in 2006, engine performance 6.5 kw, intake ø = 250 mm, nominal volume stream (after the cleaning): 4.900 m³ / h, negative pressure 2.750 pa, good condition ...

                  No price
                  Langen, Germany

                Have 5 seconds to help us improve the results?

                I'll do it
                No thanks