Used master magnetic

- 58 listings found
Sort by Price: Low to High | High to Low
  • NO. 618, MICRO MASTER, 6" x 18" BROWN & SHARPE SURFACE GRINDER, 1982

    • Manufacturer: Brown
    • Weight: 2,450 lbs

    Equipped with: 6" x 18" electric magnetic chuck hydraulic cross feed 2hp direct drive spindle motor 1hp hydraulic motor 3600 rpm motor coolant 208/3ph/60 cycle electrics specifications: height of work ground w...

    No price
    Warren, MI, USA
  • 2001 Jones & Shipman Tech Master 634X

    • Manufacturer: Jones & shipman
    • Grinding Length: 710 mm

    Jj003 jones & shipman microprocessor controlled surface grinder, model techmaster 634x, serial no m21008, mfd 2001, capacities table 600 x 300mm, long traverse, hand / hydraulic 710 / 650mm, traverse speed 3 – 25...

    No price
    United Kingdom
  • MODEL L402 LIEBHERR GEAR HOBBER

    • Manufacturer: Liebherr
    • Weight: 21,000#

    Equipped with: differential double cut power tailstock infeed automatic hob shift tangential feed to hob head rapid traverse magnetic chip separator change gears coolant system push button controls 220/440/3 pha...

    No price
    Warren, MI, USA
  • 1996 Mavag Stainless steel pressure vessel with magnetic agitator #11-0205

    • Manufacturer: Mavag

      Double jacketed reaction and stirring vessel, volume 30 l., pressure range -1/+3 bar, temperature range -10/150 °c, double jacket volume 4 l., pressure -1/+3 bar, temperature range -10/+150 °c, product touching ...

      No price
      Hamburg, Germany
    • 1981 8"X 24" Used Brown & Sharpe Horizontal Surface Grinder

      • Manufacturer: Brown & sharpe
      • Weight: 5,400 Lbs.

      height: 72" | rebuilt: 1992 | main motor: 5 hp | table size: 8" x 24" | cross travel: 8" | longitudinal: 24-1/2" | machine depth: 96" | machine width: 84" | condition info: excellent | machine weight: 5,400 lbs....

      No price
      Navasota, TX, USA
    • Pellet Mill, For Biomass [Crush Master]

          Processing is the conversion of the input materials into a homogeneous product, which is then used as a fuel for the generation of electricity and heat. crushmaster produces a full range of equipment for the prod...

          No price
          Dandenong, Australia
        • 1983 6" Width 18" Length Parker-Majestic Open Column SURFACE GRINDER, MULTI-SPEED SPINDLE, SINE ELECTRO-MAG. CHUCK

          • Manufacturer: Parker
          • Weight: 2,100 LBS.

          6" x 18" parker-majestic "super-precision" (made in usa) "open column" hand feed surface grinder/broach grinder s/n: 101-brg-83 new: 1983 ** this machine was primarily designed for grinding flat broaches. the ope...

          No price
          Harrison, NJ, USA
        • THE JET PULVERIZER 4″ S/S MICRON MASTER LAB MILL #20819-3

          • Manufacturer: JET Tools

            Used the jet pulverizer co., model 04-520. 4″ diameter micron master jet pulverizer. stainless steel contacts lab mill. equipped with syntron magnetic feeder model f-to. steam required 125 lbs/hr, air required 50...

            No price
            Hainesport, NJ, USA
          • 2001 Rubble Master RM 80

            • Manufacturer: Rubble master
            • Model: RM 80

              Engine: deutz 122 kw weight: 23 t inlet opening 800 mm x 600 mm; magnetic separator;

              No price
              Ansfelden, Austria
            • 31.5" Swing 7.5HP Spindle Clausing B70RS DRILL PRESS

              • Manufacturer: Clausing
              • Capacity: 2"

              New clausing/ibarmia geared-drive round-column drill 31.5" geared-head, electrical clutch, floor w/automatic feed reversing system for tapping model: b70rs specifications: spindle taper: 5mt quill diameter: 3.54"...

              $34,075 (USD)
              Harrison, NJ, USA