• 2003 Okuma MCR-BII 40 x 20 24155

    • Manufacturer: Okuma
    • Spindle Taper: BT-50

    (1) 20,000 rpm 5-axis b/c-axis programmable milling head (1) 8000 rpm standard milling head (1) 3000 rpm right angle milling head, 360 positions weight: 79,200 lbs. osp e100m 5-axis cnc control 50-station automat...

    No price
    Melville, NY, USA
  • 2008 Okuma MCR A-5C 25x50 10271

    • Manufacturer: Okuma
    • Capacity: 23,000 kg
    • Weight: 47,000 kg

    osp-p 200m cnc system 2 axis universal milling head (b-axis 1 deg. & c-axis 1 deg.) – 30-4000 rpm automatic tool changer – 72 position cnc rotary table – kitagawa tr-4000b scroll clutch/t stock – kitagawa s0-14 o...

    No price
    Marietta, GA, USA
  • 2008 Okuma MCR-B11 E 10140

    • Manufacturer: Okuma
    • Weight: 106,500 kg

    osp-p2000m cnc control automatic tool changer – 120 position (tool shank bt 50) elevating cross rail angle head renishaw tool length measuring steel cover – x,y axis chip conveyor

    No price
    Marietta, GA, USA
  • Sola MCR 63-29-315-8 n07l009

    • Manufacturer: Sola MCR

      we tested this with the current configuration (480 -> 240) it came in with.  we applied 480vac to the inputs and measured approximately 240vac on the output terminals.  it was not tested under a load.

      $1,999
      Leander, TX, USA
    • Sola MCR 63-29-275-8 N07L011

      • Manufacturer: Sola MCR

        we tested this with the current configuration (480 -> 240) it came in with.  we applied 480vac to the inputs and measured approximately 240vac on the output terminals.  it was not tested under a load.

        $1,249
        Leander, TX, USA
      • 2004 Okuma MCR-BII 30 x 50 10401

        • Manufacturer: Okuma
        • Capacity: 33 Ton
        • Weight: 33 Ton

        osp-e100m cnc control automatic tool changer – 72 position automatic attachment changer angle head

        No price
        Marietta, GA, USA
      • OKUMA MCR-BII 20 X 40 5-AXIS DOUBLE COLUMN MACHINING CENTER

        • Manufacturer: Okuma
        • Spindle Taper: BT50 & HSK-63

        equipped with okuma osp e100m cnc control 50-atc automatic tool changer (31) hsk tool holders (4) station aac (3) head attachments -- universal 5-axis (+/- 100° a, +/- 360° c, 20,000 rpm) -- 90° right angle head ...

        No price
        United States
      • 2013 Mecalac 6 MCR

        • Manufacturer: Mecalac
        • Hours: 2,300

        fuel: diesel | power: 75 hp | width: 2,050 cm | colour: yellow | warranty: no | ce standard: yes | engine type: 4-zyl.-deutz td 2.9 l 4 | chain status: 35% | charge weight: 5,700 kg | rubber chains: yes | oper...

        $58,377
        Neuwied, Germany
      • Okuma Model MCR-B II 20 x 40 Bridge Type Vertical Machining Centre, 2003 #5341

        • Manufacturer: Okuma

          control: specifications: inch metric travels: x axis. 157.48 4000mm y axis.. 106.30 2700 mm z axis (quill).. 31.50 800 mm +/-100 +/-360 automatic tool changer equipped with: -osp cnc control -aac (four stations) ...

          No price
          Brampton, Canada
        • 2003 Okuma MCR-BII 5-Axis 24154

          • Manufacturer: Okuma
          • Capacity: 35,200 lbs

          (1) 20,000 rpm 5-axis b/c-axis programmable milling head (1) 8000 rpm standard milling head (1) 3000 rpm right angle milling head, 360 positions weight: 79,200 lbs. osp e100m 5-axis cnc control 50-station automat...

          No price
          Melville, NY, USA