search
  • 2008 Hyundai 160lc-7a Tracked excavators

    No price - Genk, Belgium
    • Manufacturer: Hyundai
    • Hours: 5, 800

    width: 260 cm | weight: 17, 000 kg | division: construction machinery | engine type: mitshubishi | chain status: 70% | operating hours: 5, 800

  • 2000 Kobelco SK 210 LC Dynamic Acera

    $27,843 - Tartu County, Estonia Recently Added
    • Manufacturer: Kobelco
    • Hours: 15800 h

    working condition hours: 15800 h | engine: mitshubishi | country: estonia | division: construction equipment | accessories: - auto / hydraulic quick coupler- hammer hydr. function- automatic lub. s...

  • 1998 Mitsubishi Canter FE649 DOKA Kipper

    $5,281 - Plauen, Germany
    • Manufacturer: Mitsubishi

    mitshubishi canter dsk 2720kg payload tÜv for extra charge possible tire hi 60% front 30% ahzv 2 x 3500kg available immediately financing available trade-in possible further data gladly on request ...

  • Holland Boomer 25 Vinter

    $28,537 - Roskilde, Denmark
    • Manufacturer: Compact tractors
    • Hours: 1 h

    3 cyl. mitshubishi 1300 ccm diesel engine, 2 speed hydrostatic 0- 18 km / h with cruise control 3 point hitch behind 650 kg. cab with heat and fresh air, wiper / washer and rear, front and rear ...

  • 2009 Heckel Fördereinrichtung für Schmalteile/Leisten zum DEP

    No price - Nattheim, Germany
    • Manufacturer: Heckel

    bestehend aus je einem förderband nach den beiden ummantelungsmaschinen, beginnend mit einem langen bandteil vor dem ersten riemenstrang (ca. 3,7 m lang) und dann 3 bandeinheiten zwischen den 4 que...

  • Morooka Mitsubishi Motor sf. MST1500VD

    $7,303 - Forchheim, Germany
    • Manufacturer: Morooka
    • Hours: 300 Hrs

    motor mitshubishi for morooka mst1500vd, 6 cylinder turbo complete with all attachments, lima, water pump, etc new condition, only 300bs run price 6.900 .-- euro net + vat other spare parts such as...

  • 2016 Cosen Fully Automatic Bandsaw

    No price - Elk Grove Village, IL
    • Manufacturer: Cosen
    • Motor: 1 H.P.
    • Weight: 3,080 lbs.

    equipped with: snc-100 5.7" touch screen nc control coupled with mitshubishi plc controller allows for fast easy programming of any job.auto kerf compensation, " save-a-blade" feature which retract...

  • 2008 MAKINO A51

    No price - Santa Ana, CA
    • Manufacturer: Makino
    • Model: A51
    • Control: CNC (MITSHUBISHI M 70)

    x: 22 inch | y: 22 inch | z: 19.7 inch | atc: 60 | mfg: makino | mpn: a51 | rpm: 4000 rpm | axis: 4 | taper: bt 50 | region: midwest | weight: 12 tons | control: cnc (mitshubishi m 70) | palletl: ...

  • 2006 MAKINO A51

    No price - Santa Ana, CA
    • Manufacturer: Makino
    • Model: A51
    • Control: CNC (MITSHUBISHI M 70)

    x: 22 inch | y: 22 inch | z: 19.7 inch | atc: 60 | mfg: makino | mpn: a51 | rpm: 4000 rpm | axis: 4 | taper: bt 50 | region: midwest | weight: 12 tons | control: cnc (mitshubishi m 70) | palletl: ...

  • 2007 MAKINO A51

    No price - Santa Ana, CA
    • Manufacturer: Makino
    • Model: A51
    • Control: CNC (MITSHUBISHI M 70)

    x: 22 inch | y: 22 inch | z: 19.7 inch | atc: 60 | mfg: makino | mpn: a51 | rpm: 4000 rpm | axis: 4 | taper: bt 50 | region: midwest | weight: 12 tons | control: cnc (mitshubishi m 70) | palletl: ...