• MONARCH 14” WAA #5192

    No price - Baltimore, MD, USA
    • Manufacturer: Monarch

    used monarch geared head 16.5" x 78" lathe model: 14” waa s/n 10458 specifications: swing: 16 1/2” distance between centers: 78” spindle nose: d1-6 camlock hole thru spindle: 1 1/2” swing over cros...

  • 1968 Monarch 4025 48945-NC

    No price - Washington, PA, USA
    • Manufacturer: Monarch
    • Distance between Centers: 132.00 in 3352.80 mm
    • Spindle Nose: D-1

    steady rest, customer choice of chuck diameter ways: hardened and ground | power: 3 ph / 60 hz / 220-440 v existing | weight: 41560.00 lbs 18851.28 kg | control: fagor 8025/30 (recently retrofitted...

  • 1982 Monarch VTN-10 T53184

    No price - Washington, PA, USA
    • Manufacturer: Monarch

    power: existing | swing: 56.00 in 1422.40 mm | warranty: manufacturers warranty on new control, 1 year on replaced or rebuilt parts | chuck type: adjustable force power hydraulic with independent ...

  • Monarch VMC-50

    $79,000 - Watertown, CT, USA Recently Added
    • Manufacturer: Monarch

    make: monarch model: vmc-50 controls: fanuc 18i new in 2007! max x-axis travel: 51" max y-axis travel: 25.6" max z-axis travel: 29" table size: 56" x 27.5" (t-slotted) pallet size: 23" x 50" max ta...

  • 1986 Monarch VMC 150

    No price - Smyrna, TN, USA
    • Manufacturer: Monarch
    • Spindle Taper: No 45 Monarch Special

    chip conveyor hard ways 40" under spindle nose outriggers table supports

  • 2002 HERCULES MONARCH

    $6,800 - Henryville, IN, USA
    • Manufacturer: Hercules
    • Mileage: 6,503 mi
    • Horse Power: 350

    2002 hercules monarch limosiune bus. 6,500 miles, 693 detroit diesel engine (doesn't run), automatic trans, p/s, air brakes, loaded interior, loaded lavatory, wet bar with double wide refridgerator...

  • 30" x 72" cc, MONARCH,SERIES 80, 1960, CHUCKS, STEADYRESTS, COOLANT,

    No price - Bedford, OH, USA Recently Added
    • Manufacturer: Monarch

    model: 2516-20 new: 1960 s/n: 44799 specifications: swing over bed.................. 30" swing over cross slide.......... 20" distance between centers........ 72" hole thru spindle............... 3...

  • MONARCH Predator

    No price - Livonia, MI, USA
    • Manufacturer: Monarch

    monarch predator cnc lathe with live tooling and sub spindle (1996) 2.1" (54mm) bar cap., 5,000 rpm, 25 hp, sub spindle, live tooling, fanuc 18t cnc. specifications and equipment bar capacity (main...

  • Graco Monarch #10374

    No price - Marlboro Township, NJ, USA
    • Manufacturer: Graco

    graco air operated piston pump, monarch series, approx 2. 5 gpm, has aro model 651604-1, dual post drum ram, has 23" diameter aluminum follower plate, all air controls, mounted on painted steel ba...

  • 1971 Monarch Series 10 EE #16684

    No price - Jackson, MI, USA
    • Manufacturer: Monarch

    specifications 12-1/2" swing over bed 7-1/4" swing over cross slide 20" distance between centers 1-13/32" hole through spindle d-1-3 spindle nose, camlock style (approximately 1-12" hole through) i...