• NAKAMURA TOME WT-300MMY FANUC 18ITB 61979

    No price - Huntington, NY, USA
    • Manufacturer: Fanuc
    • Distance between Centers: 84"
    • Spindle Nose: A2-6

    nakamura tome wt-300mmy multi axis turning center new: 2011 specifications: capacity bar capacity (l & r).............................. 2.5" chuck size........................................ 8" sw...

  • 1997 NAKAMURA TOME TW-30MMY 7-AXIS CNC LATHE JV-20555TK

    $69,500 - Bethlehem, PA, USA
    • Manufacturer: Nakamura
    • Spindle Bore: 3.5”

    maximum spindle speed: 3,600 rpm spindle drive motor: 30 hp c-axis rotation: 0.001 degree number of stations: 12 number of driven tool stations: 12 y-axis travel (left turret only): +/- 2.75” drive...

  • 2004 Nakamura Tome WT-300

    No price - Plymouth, MN, USA
    • Manufacturer: Nakamura tome
    • Spindle Nose: A2-6

    fanuc 18i-tb cnc control, main and sub spindles, twin turret, lns quickload servo s3 barfeed, y axis travel upper turret only 2.36", y axis rapid travers 236 ipm, standard coolant system, 1000 psi ...

  • 2000 Nakamura Tome WT-250MMY 4091

    No price - Maitland, FL, USA
    • Manufacturer: Nakamura tome
    • Spindle Nose: A2-6

    y-axis: yes | x-travel: 7.67 | chuck size: 6.00 | chuck type: hydraulic | bar capacity: 2.500 | spindle nose: a2-6 | spindle motor: 20 | spindle speed: 4,500 | tool positions: 12 | total spindles:...

  • 1998 Nakamura Tome Tome SC450 Fanuc 21T

    No price - Dundee, FL, USA
    • Manufacturer: Nakamura tome
    • Spindle Bore: A2-8" / 3.94"
    • Spindle Nose: A2-8" / 3.94"

    equipment: chip conveyor tailstock all avail. tooling & manuals rs-232c port for dnc interface complete coolant system 12" 3 jaw hydraulic chuck | chuck size: 12" hydra. chuck | spindle motor: 40 ...

  • NAKAMURA TOME WT-300MMSY 8-AXIS CNC TURNING/MILLING CENTER

    No price - Bannockburn, IL, USA
    • Manufacturer: Nakamura
    • Spindle Bore: 3.1″
    • Spindle Nose: A2-6

    nakamura tome wt-300mmsy 8-axis cnc turning/milling center serial no. m300608                                  new 2005 equipped with fanuc 18i-tb cnc controls cylindrical interpolation polar coord...

  • 1995 Nakamura Tome TMC-15 CNC Turning Center w/Sub-Spindle

    No price - Spencer, MA, USA Recently Added
    • Manufacturer: Nakamura
    • Model: TMC-15
    • Spindle Nose: A2-5

    fanuc 10tf cnc control 16c collet chuck on main spindle 5c collet chuck on sub-spindle parts catcher all available toolholders all available manuals

  • 2006 Nakamura Tome Super NTX 3331

    No price - Plymouth, MN, USA
    • Manufacturer: Nakamura tome

    fanuc 16itb cnc control, lns quick load servo s3 barfeeder, misc. barfeed liners, oil matic spindle chiller, km63 shank type tool spindle, both spindles 4,500 max rpm, 12,000 max rpm tool spindle, ...

  • 1997 Nakamura Tome TW-30MMY Fanuc 16TT

    No price - Dundee, FL, USA
    • Manufacturer: Nakamura tome
    • Spindle Bore: A1-8" / 3.35"
    • Spindle Nose: A1-8" / 3.35"

    equipment: full "c" axis spindle rotation both spindles live milling/drilling capability twin spindle design twin upper turret design y axis on left side turret only tool presetter on each side (2...

  • Nakamura-Tome TW8MM (2011)

    No price - Altamonte Springs, FL, USA
    • Manufacturer: Nakamura

    fanuc 31ia 6” chucks on both spindles cutting dia. 7.48” cutting length: 4.5” bar work dia: 1.3” iecam bar feeder