• Paul Abbe RCB-54 8251

    • Manufacturer: Paul
    • Capacity: 83 Cu Ft

    one used paul o. abbe 316 ss rota-cone blender model rcb-54. the unit has a 83 c.f. capacity and a 54 c.f. working capacity. blender diameter is 54" with a 18" straight wall. loading hatch 16" diameter and disch...

    No price
    Red Bank, NJ, USA
  • 9 Cubic Foot Paul Abbe Double Cone Dryer #42079

    • Manufacturer: Paul

      8.8 cu ft (13.6 cu ft total), abbe 304ss double cone dryer blender. mfd by paul o abbe, sn a-9815-19290. 36" dia. design pressure int full vac. full cs jkt. 8" dia charging, 6" discharge. mtd on structural steel ...

      No price
      West Windsor Township, NJ, USA
    • Paul Abbe Not Applicable 4535

      • Manufacturer: Paul

        used 32 cubic feet double cone 316 stainless steel vacuum dryer-blender, mfg. by paul o. abbe, inc., s/n: a40755. 32 cu.ft. total capacity, 20 cu ft. working capacity. 1.5 hp gear motor for drive, 5 hp 1165 rpm f...

        No price
        Red Bank, NJ, USA
      • 45 Cubic Feet Ribbon/paddle Mixer ; Stainless Steel #205878

        • Manufacturer: Paul Abbe
        • Capacity: 45 CUBIC FEET / 1 CUBIC METER

        45 cuft working capacity, 304ss, ribbon blender. manufactured by paul abbe, serial number 59880. single ribbon design, packing glands on shaft, removable ribbon design. ribbon has a large sprocket on end of shaft...

        No price
        West Windsor Township, NJ, USA
      • 3' X 8' PAUL ABBE BALL MILL, C/S, JACKETED

        • Manufacturer: Paul

          one (1) used 3' x 8' paul abbe ball mill, carbon steel construction, 3' diameter x 8' long jacketed chamber, with internal lifter bars, jacketed, outboard roller bearings, on legs with 20 hp, 230/460 volt, xp, 17...

          No price
          Cleveland, OH, USA
        • 5' X 4' PAUL ABBE PEBBLE MILL, JKT.

          • Manufacturer: Paul

            one (1) used paul abbe steel pebble mill, 5' diameter x 4' straight side, modern fabricated carbon steel body, jacketed for 14.7 psi at 250 degrees f, gear and pinion design, sleeve style bearings, designed for d...

            No price
            Cleveland, OH, USA
          • Paul O. Abbe LNG .25

            • Manufacturer: Paul

              total capacity: 0.50 gallon, working capacity: 0.25 gallon. manual side dump tilt over bearing journal discharge. jacketed mixing chamber suitable for steam, water or hot oil operation. all stainless steel pro...

              $8,500 (USD)
              Millwood, WV, USA
            • 36" Dia. Paul O. Abbe Inc. Used Ball Mill

              • Manufacturer: Paul

                s/n a46311. rubber lined drum, inside dimensions: 36"ø x 42". side-mounted 6" x 9" locking hatch with counter weight on shell. max allowable working temperature for drum and jacket = 200°f. carbon steel shell...

                $9,750 (USD)
                Millwood, WV, USA
              • Paul O. Abbe 32 IN. X 48 IN. PAUL O ABBE BALL MILL – DUSTLESS DISCHARGE

                • Manufacturer: Paul

                  1 – used approx. 32 in. dia. x 48 in. long paul o. abbe ball mill. serial #a19205. steel lined chamber with bolt-in lifter bars. start/stop/jog. dustless discharge. oversized grinding doors 10 in. wide x 30 in. l...

                  No price
                  Twinsburg, OH, USA
                • Paul O. Abbe 48 in. X 48 in. PEBBLE MILL

                  • Manufacturer: Paul

                    1 – used 48 in. x 48 in. paul o. abbe pebble mill. buhrstone lined and on legs. with 10 hp gear reduced motor drive. bull gear and pinion in good condition. 16 in. dia. door. with ball valve discharge. drive can ...

                    No price
                    Twinsburg, OH, USA

                  Have 5 seconds to help us improve the results?

                  I'll do it
                  No thanks