• Polymer System

    No price - Lincoln, ME, USA

      edo polymer system

    • POLYMER 812 1061

      No price - Elk Grove Village, IL, USA

        polymer 812, 8" x 12 feed throat, 10" x 30" auger area, 2 knife solid rotor, 1 bed knife, 7.5 hp motor, vacuum take off discharge, on casters, complete with starter and controls

      • POLYMER 1116SPL GRANULATOR 14580

        No price - Elk Grove Village, IL, USA

          polymer model 1116spl granulator, s/n 11162a381, 11″ x 16″ feed throat, 2 knife open rotor, 1 bed knife, 15 hp 460 volt motor, tray feed hopper, bin discharge, on casters, complete with starter and...

        • USED MAAG VACOREX GEAR PUMP FOR POLYMERS TYPE VX 140/140

          $6,000 - Millwood, WV, USA
          • Manufacturer: Maag

          discharges low and high-viscosity plastic melts from reactors and degassing systems. 12" ø flanged inlet and outlet.shipping info: 48"x45"x58", 1986 lbs

        • CINCINNATI MILICRON (POLYMER) CMQ1632 GRANULATOR 12862

          No price - Elk Grove Village, IL, USA
          • Manufacturer: Cincinnati

          cincinnati milicron (polymer) model cmq1632 granulator, s/n 3935a019719, 16″ x 32″ feed throat 2 knife open rotor, 1 bed, 40 hp 230/460 volt 1765 rpm motor, insulated rear facing tray feed hopper w...

        • New 8' TEC Polymer Vacuum Sizing Tank

          No price - United States
          • Manufacturer: Tec Polymer

          new tec polymer vacuum sizing tank -ask for any custom modifications 3-5 weeks lead time standard configuration: 8' long x 12" wide x 12" deep 304 stainless steel 1/8" thick 3/16" end caps 1 (2ft) ...

        • New TEC Polymer Vacuum Sizing Tank

          No price - United States
          • Manufacturer: Tec Polymer

          new tec polymer vacuum sizing tank 4 week lead time configuration: 145" long x 20" wide x 12" deep 17" x 8" tank opening 304 stainless steel 1/8" thick 3/16" end caps two 72" vacuum chamber configu...

        • New TEC Polymer Vacuum Calibration Table

          No price - United States
          • Manufacturer: Tec Polymer

          new tec polymer vacuum calibration table -ask for any custom modifications 5-6 weeks lead time from date of deposit standard configuration: 12' long x 26" wide x 4" deep two 1" wide tooling mount r...

        • New TEC Polymer Vacuum Calibration Table

          No price - United States
          • Manufacturer: Tec Polymer

          configuration: 14' long x 26" wide x 4" deep two 1" wide tooling mount rails on 12" centers 2 vacuum manifolds with 12 vacuum and 12 water ports each 40 gpm mcmaster carr bag filter (1) 5hp travini...

        • Polymer 1116-SPL 1974

          No price - Hamilton, MI, USA
          • Manufacturer: Polymer

          motor: 10 hp | throat capacity: 16" x 10"