• 1998 Powermatic 60 11970

    $1,500 - Williamsport, PA, USA
    • Manufacturer: Powermatic
    • Capacity: 8"

    8" width cap. x 1/2" max. depth of cut 1.5 hp - 3,600 rpm tefc motor belt drives 3" dia. cutterhead @ 7,000 rpm produces 21,000 cpm, 3-knife cutterhead with high speed steel knives 8-1/2" x 64" cas...

  • Powermatic 160 H 11863

    $8,000 - Williamsport, PA, USA
    • Manufacturer: Powermatic

    16" single surface planer sn 760007 5hp 3-phase 208-230 volt single phase belt drive motor push button magnetic starter connected for 230 volts 0-6" thickness capacity helixhead insert knife (15x1...

  • 1987 Powermatic 180 11715

    $4,500 - Williamsport, PA, USA
    • Manufacturer: Powermatic

    18" x 6" with three knife cutterhead cutterhead guard jack screws quick set table roll adjustment sectioanl infeed roll, chipbreaker knife sharpening attachment 7-1/2 hp, 208/230/460 volt belt driv...

  • Powermatic 1150 12569

    $1,750 - Williamsport, PA, USA
    • Manufacturer: Powermatic

    used powermatic drill del 1150 15" drill press; floor model; step pulley; complete with tilting table, key chuck spindle, 1/2 hp, 3 ph motor, 230/460 volt, and manual switch.

  • Powermatic 100 12662

    $2,150 - Williamsport, PA, USA
    • Manufacturer: Powermatic

    used powermatic model 100. 12" single surfacersolid corrugated infeed rollsolid chipbreaker2hp, 220v, single phase motorbelt drive to a 3-knife cutterheads/n ry good condition

  • Powermatic 81 12729

    $3,250 - Williamsport, PA, USA
    • Manufacturer: Powermatic

    serial# ed powermatic 20" band saw. - model 81,- 2 hp, 230/460v 3ph, 1800 rpm- belt driven two speed- cutting speeds: 2000 sfm and 4500 sfm- table tilts 45º right, 15º left- 3/8" to 3/4" blade- foo...

  • 1962 Powermatic 90 12336

    $1,200 - Williamsport, PA, USA
    • Manufacturer: Powermatic

    used powermatic v.s. wood lathe. model 90230v, three phases/n: 90/5-4290.

  • 1967 Powermatic 221 12510

    $7,500 - Williamsport, PA, USA
    • Manufacturer: Powermatic

    used powermatic model 221 planer.- 20" x 8" cap., - 10 hp tefc motor, - 220v, three phase- belt-driven, - straight 3-knife cutterhead on ball bearings; - 1 hp feed motor for variable speed of 20 - ...

  • Powermatic Model 81 12500

    $1,500 - Williamsport, PA, USA
    • Manufacturer: Powermatic

    used powermatic 81 band saw.1-1/2 hp 115/208-230v single phases/n 3-2091catalog description:powermatic model 81 20" bandsaw; 1.5 hp 115/230 volt single phase; 24'x24' table that tilts 45 degrees ri...

  • Powermatic 221 H 11623

    $12,000 - Williamsport, PA, USA
    • Manufacturer: Powermatic
    • Capacity: 20" x 8"

    20" x 8" cap. 10 hp tefc motor belt-driven helixhead on ball bearings 1 hp feed motor for variable speed of 20 - 50 fpm corrugated 2" dia. infeed 4" smooth outfeed roll sectional chipbreaker comple...