• 36" W. x 36" H. x 36" L., YOUNG & BERTKE, 600 F CABINET OVEN, TESTED PRIOR TO SHIPMENT

    No price - Tolland, CT, USA

      division: metalworking

    • 38" W. x 62" H. x 38" L., DESPATCH, 650 F ELECTRIC WALK IN OVEN, TESTED PRIOR TO SHIPMENT

      No price - Tolland, CT, USA
      • Manufacturer: Despatch

      division: metalworking

    • 36" W. x 48" H. x 36" L., BLUE M, 600 F ELECTRIC WALK IN OVEN, STAINLESS INTERIOR, TESTED PRIOR TO SHIPMENT

      No price - Tolland, CT, USA
      • Manufacturer: Blue m

      division: metalworking

    • Asymtek A-500 P05D021

      $949 - Leander, TX, USA
      • Manufacturer: Asymtek

      without the control computer, the best we can test it is to verify that the dispensing head moves in all 3 axes with the controls on the front panel.  when the "make this shape" buttons on the fron...

    • UQM HPM125 Q18D008

      $2,999 - Leander, TX, USA
      • Manufacturer: UQM

      the motor can be turned by hand.  without a controller, we are unable to do any other testing.

    • Olympus BX50 Q33D018

      $3,499 - Leander, TX, USA
      • Manufacturer: Olympus

      this microscope is in good working condition.  the view through the scope is as bright and clear as one would expect.  all mechanical and optical adjustments are working properly.  the light works ...

    • Denso RC5-SBA O33D003

      $3,499 - Leander, TX, USA
      • Manufacturer: LOT

      these came from a closed facility and have not been tested separately.  this is not a complete and ready-to-run set; some expertise will be required to wire/plumb and program this for your applicat...

    • MFI Vibsense Q05D016

      $1,999 - Leander, TX, USA
      • Manufacturer: LOT

      this lot is in good working condition. we used a signal generator that was not strong enough to make our little speaker give off audible noises, but strong enough to register on the transducers and...

    • Keithley Instruments 237 Q29D019

      $2,199 - Leander, TX, USA
      • Manufacturer: Keithley

      this unit is in good working condition. we gave it only a quick check to verify basic functions.  we used a 1kohm resistor to get 100ma at 100v and a 10 megohm resistor to get 1na at 10mv. the filt...

    • Brooks 003-9010-03 O41D001

      $1,799 - Leander, TX, USA
      • Manufacturer: Brooks

      this elevator was removed from a decommissioned center and not tested separately.