• Delta/Rockwell 12667

    $1,700 - Williamsport, PA
    • Manufacturer: Delta

    used delta/rockwell table saw.12-14 table saw; 7.5hp 230/460 volt three phase,wired 230 volt, 12/14" tilting arbor saw; mitre gauge, biesmeyer fence, splitter with anti-kickback fingers.s/n 115-1565

  • Rockwell/Delta 20" Bandsaw

    $1,595 - United States
    • Manufacturer: Delta
    • Weight: 750 lbs.

    northeast us rockwell/delta 20″ bandsaw model# 28-3x0 serial # 1554787 2hp, 230/460v, 3phase 19-3/4″ throat 10-1/4″ cutting height 20″x024″ table footprint: 43″x32″x79″ weight: 750lbs

  • Rockwell Delta 31-730 Combination 6" Belt and 12" Disc Sander

    No price - Brampton, Canada
    • Manufacturer: Delta

    disc diameter.......... 12" belt size.............. 6"x48" motor.................. 1.5 hp electrics.............. 110/1/60

  • Used Rockwell/Delta 28-3XO 20" Bandsaw

    $2,950 - United States
    • Manufacturer: Delta
    • Weight: 700 lbs.

    northeast us used rockwell 20" bandsaw. - model 28-3x0 - 2 hp, 208-230/460 3ph motor, - 24" x 20" table, - 13" clearance under top guide, - ball bearing construction, - 1" blade capacity, - cast ir...

  • Rockwell/Delta 24" X 9" Planer, Ex. Cond.

    $6,500 - United States
    • Manufacturer: Delta

    midwest rockwell/delta 24" x 9" planer, model 22-503. very good condition, cleaned and checked. sectional infeed roller and chip-breaker allows multiple boards to be planed at the same time. variab...

  • Delta/Rockwell 34-395 12669

    No price - Williamsport, PA
    • Manufacturer: Delta

    used delta/rockwell table saw.12-14 table saw; 7.5hp 230/460 volt three phase,wired 230 volt, 12/14" tilting arbor saw; mitre gauge, biesmeyer fence, splitter with anti-kickback fingers.s/n 1807264

  • 20" Throat 12" Height Rockwell-Delta 28-345 VERTICAL BAND SAW, Single Phase,2 HP Vari-Drive, Blade Welder, Tilt t

    $2,450 - Harrison, NJ
    • Manufacturer: Delta
    • Weight: 1,150 LBS

    20" rockwell delta vertical band saw model: 20" 28.345, s/n: 1627769, new: 1970's specifications: throat, band to column ............................ 20" maximum work height ..........................

  • 14" x 42" DELTA ROCKWELL Geared Head Engine Lathe

    No price - Farmingdale, NY Recently Added
    • Manufacturer: Delta
    • Distance between Centers: 42"

    equipped with: 9" 3-jaw chuck, tool post, tail stock

  • Delta/Rockwell 17-600

    $2,200 - South El Monte, CA Recently Added
    • Manufacturer: Delta

    (2) drill chucks swing: 17" | serial: 14300310/1430309 | throat: 8.5" | weight: 1,100 lbs. | capacity: 17" | table size: 65" x 24" | spindle taper: #2mt | number of heads: 2 | spindle speeds (5): 2...

  • Delta/Rockwell DP-600

    $1,250 - South El Monte, CA Recently Added
    • Manufacturer: Delta

    table elevating mechanism start/stop button serial: 86-6442 | weight: 450 lbs. | capacity: 17" | horsepower: 1 | quill travel: 5" | dimensions (l x d x h): 24" x 34" x 67"