• A-C 105L1.5 91224

    No price - La Porte, TX, USA
    • Manufacturer: A-C

    with motors, gear, and lube skid; suction pressure 150 psig; motor: louis allis, type jtx, no tag, 1250 hp, 1785 rpm, 7210ds frame, 2300 volts, 3 phase, 60 hertz, 279 amps, 1.15 service factor; gea...

  • USED AMERICAN KUHNE AK350-A/C-EXT 3.5″ 15038

    No price - Elk Grove Village, IL, USA
    • Manufacturer: American

    used american kuhne model ak350-a/c-ext 3.5″ extruder, s/n 1954, 30:1 l/d electrically heated air cooled non-vented barrel. gearbox is rated at 150 hp at 1725 input rpm with a service factor of 1.6...

  • USED AMERICAN KUHNE AK450-A/C-EXT 4.5″ 15037

    No price - Elk Grove Village, IL, USA
    • Manufacturer: American

    used american kuhne model ak450-a/c-ext 4.5″ extruder, s/n 1954, 30:1 l/d electrically heated air cooled non-vented barrel. gearbox is rated at 150 hp at 1104 input rpm with a service factor of 1.6...

  • YOKOGAWA ZR22G-100-S-C-E-T-Q-E-A/AV

    $962 - Delta, OH, USA
    • Manufacturer: Yokogawa

    yokogawa zr22g-100-s-c-e-t-q-e-a/av sensor type: bin | width: 12.5 | height: 12 | length: 55.5 | weight: 33.9 | address: 6401 rogers road delta, ohio 43515, usa

  • 1400 GAL ROSS VM1400 VERSAMIX, C/S, 200/75 HP

    No price - Cleveland, OH, USA
    • Manufacturer: Ross

    one (1) used 1400 gallon ross tank mounted versamix, model vm1400, carbon steel construction, approximately 6' diameter x 6' straight side, fully removable dish top, dish bottom, rated 10 psi at 20...

  • 2009 PORTEC S/S A-3115SP900

    No price - Ball Ground, GA, USA
    • Manufacturer: PORTEC

    15" x 3-tier spiral case conveyor. has (5) 1-1/2hp, 208-230/460v, 4.9-4.5/2.25 amps, 3ph, 60hz baldor motors. c-flow configuration. approx. 136" existing differential height.

  • 1998 Caterpillar D6R LGP w/ S/Tilt Blade

    $55,000 - Sutherlin, VA, USA Recently Added
    • Manufacturer: Caterpillar

    6 cyl cat engine, 3 spd trans w/ diff steering, 36 in pads, 70% u/c, 13 ft s/tilt blade, enclosed cab w/ a/c & heat - sold to trinadad

  • 1998 A&B Process Distillation Column - 18 Tray C-1505

    No price - Grant City, MO, USA
    • Manufacturer: A&B Process

    built by a&b process for icm in 1998. s/n 80823501. shell and plates are 304ss. contains 18 trays. size is 5.5 ft diameter x 37 ft tall s/s, oah 43 ft. asme nat'l bd # 5 rated at mawp 40/-7 psi @ 2...

  • 7.5 HP GARDNER DENVER BLOWER, MODEL 407-0-7-AD, C/S

    No price - Cleveland, OH, USA
    • Manufacturer: Gardner

    one (1) used gardner denver lamson multistage centrifugal blower, model 407-0-7-ad, carbon steel construction, approximately 210 cfm, 7.5 hp, 3/60/230/460 volt, 3520 rpm motor, mounted on a frame, ...

  • 7.5 HP LAMSON BLOWER, MODEL 407-4-3-AD, C/S

    No price - Cleveland, OH, USA
    • Manufacturer: Lamson

    one (1) used lamson multistage centrifugal blower, model 407-4-3-ad, carbon steel construction, approximately 210 cfm, 5" inlet, 4.5" outlet, 7.5 hp, 3/60/230/460 volt, 3520 rpm motor, mounted on a...