• 2005 Baarck Jupiter 5050

    $14,172 - Oldenburg, Germany
    • Manufacturer: Baarck

    4-balkig, feeding rail, dachring roll, 27 spiral tines in 40x40 with narrow coulters, tine distance: approx. 80 cm, line spacing: with extension arms, with trailing tines, with roof ring roller te...

  • 1998 Dammann ANPD 4024

    $15,850 - Oldenburg, Germany
    • Manufacturer: Dammann

    distance control, uni-control, pre-matic shutdown, tandem nozzle support, 2 "external filling connection, act control, automatic steering, automatic, tires (v): 20.8r38, contact: nikolaus schmahl,...

  • 2012 Claas Variant 380 RC

    $26,472 - Oldenburg, Germany
    • Manufacturer: CLAAS
    • Model: VARIANT 380 RC

    ball counter reading: 5.882, tires (v): 19.0 / 45-17 10 pr, speed: 25, on-board computer / monitor:, 540 rpm completely new belts after the season 2016 contact: nikolaus schmahl, phone: 04361 / 4...

  • 2007 Dammann ANP 5836

    $55,867 - Oldenburg, Germany
    • Manufacturer: Dammann
    • Model: ANP 5836

    * 2x brand new outrigger with safety guard * 5 t brake axis, hydr. pump drive by tractor, computer basic terminal m. gps-receiver egnos, trackliter ii, section control, fully automatic boom cont...

  • 2010 Deutz-fahr Agrotron TTV 630

    $61,744 - Oldenburg, Germany
    • Manufacturer: Deutz-Fahr
    • Model: AGROTRON TTV 630
    • Hours: 3780 h

    50 km / h is still reduced to 40 km / h, front linkage, front sprocket shaft 1000 e, four-wheel drive, air conditioning, compressed air brake 1- and 2-circle, gef. front axle, suspension cabine-mo...

  • 2009 Brantner TA 23065/2

    $25,361 - Oldenburg, Germany
    • Manufacturer: Brantner

    spring-stabilizer, k80-bottom bracket, 600 mm wall mount, 60 mm / h-type grille with plexiglass, attachment triangles, dimensions: 6,50x2,23 / 2,28x1,50 / 2,10m, 22 m³ without attachments, 31 m³ wi...

  • 2000 Case IH Magnum MX 240

    $42,923 - Oldenburg, Germany
    • Manufacturer: Case IH
    • Model: MAGNUM MX 240
    • Hours: 4,827 h

    contact: nikolaus schmahl, phone: 04361 / 4938-13, mobile: 0171/4112601

  • 1999 Case IH Magnum MX 240

    $40,777 - Oldenburg, Germany
    • Manufacturer: Case IH
    • Model: MAGNUM MX 240
    • Hours: 5,398 h

    swing: no hewa ​​front hydraulics 3,5 t contact: nikolaus schmahl, phone: 04361 / 4938-13, mobile: 0171/4112601

  • 2000 Överum DX 590 H-XS

    $9,009 - Oldenburg, Germany
    • Manufacturer: Överum

    stripping body, frame pivoting device, rabe support wheel, without packer arm contact: nikolaus schmahl, phone: 04361 / 4938-13, mobile: 0171/4112601

  • 2009 CLAAS Axion 840 Cmatic

    $59,019 - Oldenburg, Germany
    • Manufacturer: CLAAS
    • Model: AXION 840 CMATIC
    • Hours: 3,578 h

    radio: yes proactive front axle, load-sensing hydraulic system with variable pump (150 l / min), electropilot with 5 control units, automatic climate control, low-frequency driver's seat incl : n...