• 1960 Sidney 2013

    No price - Washington, PA, USA
    • Manufacturer: Cushman

    hardened bed ways, reground ways size: 20.00 in 508.00 mm | power: 3 phase, 220/440 volts | chuck size: 15.00 in 381.00 mm | chuck type: four jaw independent | feed range: 0.107 - 0.0017 in 2.7178 ...

  • 2016 Renault MASTER COMBI SIDNEY BUS 19 PLAZAS

    $82,914 - Spain
    • Manufacturer: Renault

    renault master combi sidney bus 19 plazas year 2016 diesel kms master bus 19 squares (driver included). 3 places adapted for the handicapped. accesses adapted. suspended driver's seat. control...

  • Sidney 26"x100"

    No price - Dundee, FL, USA
    • Manufacturer: Rapid

    equipment: 7.5" steady rest rapid traverse tracer attachment hardened and ground ways (look like new) all available manuals minor adjustment needs to be made in top gear range | chuck size: 18" 4-...

  • Sydney 20 x 104

    $14,500 - Washington, PA, USA
    • Manufacturer: Sydney

    independent capacity swing: 21 ½” center distance: 104” hp: 10 rpm range: 22 – 1500 feed range: .107 - .0017 rapid traverse: independent ¾ hp spindle taper: d-1-6 spindle hole: 2 1/16” tailstock ta...

  • 2015 Tree Farmer 10 inch tree shear

    $6,395 - Canton, NY, USA
    • Manufacturer: Tree farmer

    skid steer mount tree shear sidney mfg 10 inch tree shear

  • Sidney 18 X 54 Engine Lathe

    No price - United States
    • Manufacturer: PM

    16" 4 jaw chuck, tail stock, tool post, steady rest., building 298.

  • 1954 18" X 72" Used Sidney Engine Lathe

    No price - Navasota, TX, USA
    • Manufacturer: Sidney
    • Spindle Nose: D1-6

    feeds: .0075 to 240 | height: 66" | weight: 7,500 lbs. | chuck size: 16" 4 jaw | main motor: 10 hp. 220 / 440 | thread dial: yes | coolant pans: yes | spindle hole: 11-1/2" | spindle nose: d1-6 | ...

  • SIDNEY 20 x 80 Mdl 20-13 ENGINE LATHE #3027

    No price - Houston, TX, USA
    • Manufacturer: SIDNEY
    • Spindle Bore: 2-1/16"
    • Spindle Nose: D1-6

    20" x 80" sidney mdl 20/13 engine lathe threads: 1 - 92 tpi | spindle bore: 2-1/16" | spindle nose: d1-6 | swing over bed: 21" | spindle id taper: #6mt | spindle speed range: 15 - 1000 rpm | swing ...

  • 1954 24" X 72" Used Sidney Engine Lathe

    No price - Navasota, TX, USA
    • Manufacturer: Sidney
    • Spindle Nose: L-2

    feeds: .0075 to 240 | height: 66" | weight: 15,000 lbs. | chuck size: 18" 4 jaw | main motor: 20 hp. 220 / 440 | thread dial: yes | coolant pans: yes | spindle hole: 2-3/4" | spindle nose: l-2 | t...

  • 36" X 192" Sidney Model 16 Heavy Duty Engine Lathe

    No price - Elk Grove Village, IL, USA
    • Manufacturer: Bell
    • Spindle Bore: 2 3/16"

    24" (4) jaw chuck, (2) steady rests, hardened and ground ways