• 1986 Strojarne Piesok NTC 2500/4

    $6,654 - North Rhine-Westphalia, Germany
    • Manufacturer: Piesok

    maximum cutting length: 2500 mm maximum sheet thickness: 4 mm steel yrdeqk electrically adjustable rear fence with fine adjustment via hand wheel sheet metal retaining spare blade table extensions ...

  • 1989 Strojarne Piesok XZMP 20 x 2000

    $25,113 - Poland
    • Manufacturer: Piesok

    mechanical bending machine: xzmp 20x 2000. mqkrh year prod. 1989 bending: 20mm x 2000mm. rolling: 32mm x 2000mm.

  • 1988 Strojarne Piesok XZCT 3150/16

    $28,935 - Poland
    • Manufacturer: Piesok

    parameters: - max. length of rolled sheet of 3000 mm. 3i38rmbpn - max. bending thickness of 16 mm. - max. thick roll of 22 mm. - minimum diameter roll of about 450-500 mm. - the diameter of the upp...

  • 1990 Strojárne Piesok k.p. NTC 1250/2,5

    No price - Blansko, Czech Republic Recently Added
    • Manufacturer: Piesok

    the maximum length of shearing 1250 mm the maximum thickness of sheet the strength 490 mpa 2,5 mm the minimum thickness of the shear sheet of 0.25 mm the number of strokes during continuous runn...

  • 1984 Strojárne Piesok CTO 160

    No price - Blansko, Czech Republic
    • Manufacturer: Piesok

    swing over bed 280 mm distance between centers 750 mm swing over cross slide 150 mm swing in the deepening of 370 mm enhance the width of the clamping plate 50 mm spindle bore 36 mm taper met...

  • 1989 Strojárne Piesok NPM 10

    No price - Blansko, Czech Republic
    • Manufacturer: Piesok

    the largest dimensions of the material strength of 400 mpa plate, 10 mm thick flat steel 50x12 mm round steel diameter 25 mm 25x25 mm square steel l section steel, 60x60x8 mm t length of the blade ...

  • 1986 Strojárne Piesok NPM 10

    No price - Blansko, Czech Republic
    • Manufacturer: Piesok

    the largest dimensions of the material strength of 400 mpa plate, thickness 10 mm 50x12mm steel flat 25mm round steel 25x25mm square steel profiled steel l, t 60x60x8mm the length of the blad...

  • 1968 Strojárně Piesok LRS 40/530

    No price - Blansko, Czech Republic
    • Manufacturer: Piesok

    nominal force 400 kn passage b 530 mm spindle diameter 100m max. distance between table and ram 600 m of the ram stroke 350 mm clamping ram in the cavity diameter d / to 25 / 50 mm clamping surfac...

  • 1983 Strojárne Piesok NTA 3150/10 A

    No price - Blansko, Czech Republic
    • Manufacturer: Piesok

    maximum thickness of cut sheet strength 490 mpa 10 mm maximum cutting length 3150 mm minimum thickness of plates 1 mm number interrupted 20 strokes / min unloading the sidewalls 400 mm install...

  • 1990 Strojárne Piesok k.p. NTC 2500/4

    No price - Blansko, Czech Republic
    • Manufacturer: Piesok

    cutting length 2550 mm the greatest thickness 4 mm strength of 500 mpa the minimum width of 40 mm bars trimming the angle between the blade 1 ° 20 ' the number of strokes of the cutter traverse...