• SUNSTRAND LMV-331

    • Manufacturer: SUNSTRAND

      pump and gearbox s/n 76116916, input rpm 3550, from unit 102, area d.

      No price
      Houston, TX, USA
    • Sunstrand Duplex No. 33 Rigidmil

          type 33, s# 25-35, 22" x 6' table, 30" vertical head travel, geared for 218 or 394 rpm on spindles via pick off gears, speed range is 143 to 600 with pick off gears not included, ...

          $2,250
          Minneapolis, MN, USA
        • 1963 18" Sunstrand / Arter Rotary Surface Grinder Horizontal Spindle

          • Manufacturer: Arter
          • Weight: 7,000 Lbs.

          height: 75" | weight: 7,000 lbs. | main motor: 7-1/2 hp. 220 / 440 volt | floor space: 65" x 102" | table speeds: 60 to 250 rpm's | splash guards: yes | condition info: good | swing inside guard: 25" | magnetic ...

          No price
          Navasota, TX, USA
        • 1955 18" Sunstrand / Arter Rotary Surface Grinder Horizontal Spindle

          • Manufacturer: Arter
          • Weight: 7,000 Lbs.

          height: 75" | weight: 7,000 lbs. | main motor: 7-1/2 hp. 220 / 440 volt | floor space: 65" x 102" | table speeds: 60 to 250 rpm's | splash guards: yes | condition info: good | swing inside guard: 25" | magnetic ...

          No price
          Navasota, TX, USA
        • 33-1448 Sunstrand 33-1448 Simplex Auto Production Mill

              model 33-1448, 14" x 48" table, rise and fall

              $5,500
              Minneapolis, MN, USA
            • 400 Horsepower Gear Reducer #17135

                  400 hp, sunstrand gear increaser. model lmc333, sn 75115916a. input rpm 3550, output rpm 14,738.

                  No price
                  West Windsor Township, NJ, USA
                • 945 Cfm Centrifugal Compressor #17133

                      945 acfm, sunstrand centrifugal gas compressor. mdl lmc-313, sn 75115920. ratio 2.47, pd 36.5 psia.titanium construction. 1433 scfm, 1 stage. max working pressure 1440 lbs @ 80 deg f. 6"x4" 600# flanges. w/200 hp...

                      No price
                      West Windsor Township, NJ, USA
                    • 5 HP FALK RIGHT ANGLE DRIVE #B-3507

                      • Manufacturer: Falk

                        (2) mfg. falk division of sunstrand model 300mdxdf3a 5 hp, 1750 rpm, 230/460v, 3ph 39.65 ratio, 44 rpm output, cw (2) available

                        No price
                        Rehoboth, MA, USA
                      • 1964 18" Sunstrand Rotary Surface Grinder Horizontal Spindle

                        • Manufacturer: Arter
                        • Weight: 7,000 Lbs.

                        specification description swing inside guard 28" magnetic chuck size 18" life left on magnetic chuck 1/2" vertical working height 8" tilt of table for convex & concave grinding 20 degrees table speeds 30 to 203 r...

                        No price
                        Navasota, TX, USA
                      • 5.5 HP FALK INLINE GEAR REDUCER #B-3594

                        • Manufacturer: Falk

                          mfg. falk sub. of sunstrand corp. model rk2050f3a, m.o. 990u0356 rated for 5.5 hp, 1753 rpm in, 13.5 rpm out 127.7 ratio, class 2, service factor 1.0 output shaft = 2 7/8 x 5 inch, input = 1.5 x 3 inch motor is o...

                          No price
                          Rehoboth, MA, USA