Used t h

- 17370 listings found
Sort by Price: Low to High | High to Low
  • Approx. 7500 gallon, 8' dia. x 17' T/T

    • Manufacturer: PARAGON FAB.

      Approx. 7500 gallon, 8' dia. x 17' t/t. horizontal vessel. rated 57/fv psi @ 300 deg.f., 24" manway. 3/8" wall thk.

      No price
      Penns Grove, NJ, USA
    • MEPACO T-4000 #12435

      • Manufacturer: MEPACO

        Mepaco 500 lb. capacity tote dumper. max. pressure: 1700 psi, 2 gpm. emerson motor: 2 hp, 3450 rpm, 115/230v, 20.4/10.2 fla, 60 hz, 1 phase. overall dimensions: 75"h x 72"w x 61"l.

        No price
        Ball Ground, GA, USA
      • Discflo Corp. Stainless Steel pump with suction pot (2' dia x 5' T/T)

        • Manufacturer: DISCFLO CORP.

          Discflo corp. stainless steel pump with suction pot (2' dia x 5' t/t). pump is 6x4 rated 50 gpm.

          No price
          Penns Grove, NJ, USA
        • MARQ HPA-T-SBD/RH/ #14285

          • Manufacturer: MARQ

            Capable up to 30 cases/minute, but varies depending on case length. case sizes: 8" - 22" in length, 6" - 20" in width and 5" - 19" in height. 2" tape head. side belt drive. right hand control panel. handcrank for...

            No price
            Ball Ground, GA, USA
          • Acme T-1-81052 Buck-Boost Transformer

            • Manufacturer: Acme

              The acme model t-1-81052 buck-boost transformer provides tremendous capabilities and flexibility in kva sizes and input/output voltage combinations. specifications: - primary volts: 120 x 240 - secondary volts: 1...

              No price
              East Lyme, CT, USA
            • Acme T-1-81052 Buck-Boost Transformer

              • Manufacturer: Acme

                The acme model t-1-81052 buck-boost transformer provides tremendous capabilities and flexibility in kva sizes and input/output voltage combinations. specifications: - primary volts: 120 x 240 - secondary volts: 1...

                No price
                East Lyme, CT, USA
              • T-Slotted Drilling Machine Workholding Block / Table / Box 36.5" X 34.5" X 30"

                • Manufacturer: Unbranded/Generic

                  This item is used. t-slot dimensions are 1-1/4"w slot and 2"w  x 1-1/4"h t. the hollow part dimensions are 18-3/4"l1 x 21"l2 (top + bottom length) and 18.5"h1 x 11.5h2 x 5"h3 (far left height; top far right heigh...

                  $3,500 (USD)
                  Fleetwood, PA, USA
                • T-Slotted Drilling Machine Workholding Block / Table / Box 30" X 30" X 36"

                  • Manufacturer: Unbranded/Generic

                    This item is used. t-slot dimensions are 1-1/4"w slot and 2"w  x 1-1/4"h t. the hollow part dimensions are 18-3/4"l1 x 21"l2 (top + bottom length) and 18.5"h1 x 11.5h2 x 5"h3 (far left height; top far right heigh...

                    $2,500 (USD)
                    Fleetwood, PA, USA
                  • H&S FB7418

                    • Manufacturer: H&S

                      Consignment unit: h&s 7+4hd forage box; 18ft, tandem axle, 14lx16.1 tires, front left hand discharge, t-rod style chain,

                      $13,900 (USD)
                      Quincy, IL, USA
                    • 20″ (508 mm) x .134″ (3.40 mm) T&H LEMONT Entry Guide/Edge Trim Unit #2729

                      • Manufacturer: Edge

                        5 pass slide arrangement 1 edge tool holder slide 4-entry guide rolls 1-exit guide roll 1-chip pan quick lift air cylinders for strip guides

                        No price
                        Perrysburg, OH, USA