• 1998 Taylor THD300M

    • Manufacturer: Taylor

      good running condition. used as rental machine. status: available | carriage: standard pin type - no attachments | steering: power | mast type: 2-stage | powered by: diesel | load center: 24 " | chassis type: pne...

      No price
      Coraopolis, PA, USA
    • 1998 Taylor TE650L

      • Manufacturer: Taylor
      • Model: TE650L

        very well maintained machine. runs and operates well, nor leaks. price includes complete service and new taylor red paint

        No price
        Coraopolis, PA, USA
      • 1999 Taylor 20 section x 8.5 12224

        • Manufacturer: Taylor

          used taylor clamp carrier.20 section, 8.5' wide6 clamps per sectionclamps open 32" with 2-1/2" jawspneumatic rotationpneumatic tightnings/n f298, 1999

          $14,900 (USD)
          Williamsport, PA, USA
        • 2014 Taylor TXLC975

          • Manufacturer: Taylor
          • Capacity: 43,092 kg(95,000 lb)
          • Hours: 11000

          three units available- qsm11-c335-tier 3 cummins diesel, t32 automatic transmission, - app 10000 hours, taylor 20-40 spreader w/powered pile slope, full cab with a/c and tilt option, well maintained truck - tires...

          No price
          Savannah, GA, USA
        • 2008 Taylor THDC975

          • Manufacturer: Taylor
          • Model: THDC975
          • Capacity: 40,824 kg(90,000 lb)
          • Hours: 11000

          big red, inc. rental fleet truck 5-high loaded capacity, tier iii cummins engine, 11000 original hours, full cab with heater, defroster, air ride seat, and factory a/c, taylor 20-40 spreader w/power pile slope, t...

          No price
          Savannah, GA, USA
        • 1992 Taylor 20 section x 8.5 wide 11619

          • Manufacturer: Taylor

            model-800165 8.5 wide x 20 section 6 clamps per section 3-1/2" jaws x 32" opening total clamps 120 hydraulic rotation and auto tighten loosen, two panel flatteners

            $18,000 (USD)
            Williamsport, PA, USA
          • 1994 Taylor-Hobson Talysurf 120L

            • Manufacturer: Taylor

              serial: 469 | weight: 25.35 lbs 11.50 kg | gauge type: phase grating interferometer, 1 mn force nominal | resolution: 12.8 nm @ 10 mm range | machine width: 5.00 in 127.00 mm | condition_info: excellent | machin...

              No price
              Washington, PA, USA
            • Taylor Hobson 250 Gear Inspect

              • Manufacturer: Taylor

                works great. nice model.needs software update. includes table measurement capacity maximum diameter 300mm (11.8 in) maximum weight 20kg (44.1 lb) maximum height 300mm (11.8 in) worktable & spindle worktable diam...

                $3,100 (USD)
                Washington, PA, USA
              • Taylor 138B-96 Plate Spreader 35111

                • Manufacturer: Taylor

                  never used in production! spring-loaded glue pan w/ foot-treadle control includes spray bottle & cover

                  No price
                  Hughesville, PA, USA
                • 100 KVA 36" Throat Taylor-Winfield M8CB-38-100-LCD SPOT WELDER, Seam Welder w/Intertron Program. Cntrl Mdl. MC301B

                  • Manufacturer: Taylor
                  • Weight: 10,000 lbs.

                  taylor winfield 180 kva tri-phase resistance seam welder, with late model controls manufacturer : taylor winfield type : seam, m8cb-38-100lcd, gear drive, circumferential. serial number : 91289 primary volts. : 4...

                  $49,500 (USD)
                  Harrison, NJ, USA

                Have 5 seconds to help us improve the results?

                I'll do it
                No thanks