• Temptek CF-10A-21HBx

    • Manufacturer: Temptek

      make: temptek model: cf-10a-21hbx serial: 7-8-6809 date of mfg: 7/21/98 max operating pressure: 100 psi media: water/glycol temp: 48-70 degrees refrigerant: r22=54 lbs water supply required: 20 gal 230 volts 3 ph...

      $6,500
      Watertown, CT, USA
    • 2007 CHARMILLES TYPE FO-550S CNC DIE SINKER TYPE EDM

      • Manufacturer: Charmilles

        equipped with: agie-charmilles cnc controls, 8-position erowa pallet system with 12.5" x 12.5" pallets, 77-station tool holder, temptek chiller

        No price
        Farmingdale, NY, USA
      • 2007 Charmille FO-550 S 27894

        • Manufacturer: Charmille
        • Weight: 3,520 Lbs

        serial no.: 667-427 agie-charmilles cnc control 8-position erowa pallet system with 12.5" x 12.5" pallets 77 station tool holder temptek chiller under power in well-maintained cnc moldmaking shop

        No price
        Melville, NY, USA
      • Conceptronic HVA HT 120

        • Manufacturer: Conceptronic

          make: conceptronic model: hva ht 120 high velocity air revlow oven supply voltage: 208 vac, 3 phase, 60 hz rating current: 150 amps rated full load current: 116 amps ampere rating of largest motor/load: 24 amps m...

          $3,900
          Watertown, CT, USA
        • 2011 TEMPTEK VTO-2100 TEMPERATURE CONTROLLER

          • Manufacturer: TEMPTEK
          • Weight: 245

          bay: 2800 | aisle: 08b | weight: 245 | electric: 3/60/460

          $699
          Euclid, OH, USA
        • 2009 TEMPTEK VTO-2100 TEMPERATURE CONTROLLER

          • Manufacturer: TEMPTEK
          • Weight: 245

          bay: 2800 | aisle: 08b | weight: 245 | electric: 3/60/460

          $699
          Euclid, OH, USA
        • 2011 TEMPTEK VTO-2100 TEMPERATURE CONTROLLER

          • Manufacturer: TEMPTEK
          • Weight: 275

          bay: 2800 | aisle: 08b | weight: 275 | electric: 3/60/460

          $699
          Euclid, OH, USA
        • 3.5" Welex Profile Line

          • Manufacturer: Welex

            3.5" welex profile line consisting of: 3.5" welex single screw extruder, 32:1 l/d ratio, air cooled, 5 barrel zones, 150 hp dc motor, direct drive, to lufkin changer gear gear box. currently set up for 17.59:1 r...

            No price
            United States
          • YODER TUBE MILL LINE

            • Manufacturer: Yoder

              stock id: #7897 specifications: payoff reel: littell double-end motorized decoiler model 40-12, 4000lb cap., id: 15” - 20” manual adjustment 12” width, air clutch brake, 62” coil keepers seam welder: gould inten...

              No price
              Duarte, CA, USA