Used thermatool

- 21 listings found
Sort by Price: Low to High | High to Low
  • 2" THERMATOOL / ALPHA DOUBLE CUT CUT-OFF

    • Manufacturer: Alpha
    • Capacity: 25" x 30"

    Year 2000 flying cut-off double cut design speed: 400 fpm capacity: 25" x 30" cutoff capacity: 2" dual column 30' entry feed conveyor digital controller digital readout air clutch hydraulic unit dc die accelera...

    No price
    Newark, NJ, USA
  • 127mm (5") x 4mm Neirotti Tube Mill with Thermatool Welder OTO Cut Off

    • Manufacturer: Neirotti Italy / Thermatool USA / OTO Mills/ MAIR Research
    • Weight: 10 Ton

    Manufacturer: neirotti italy / thermatool usa / oto mills/ mair research tube diameter range: 42mm to 127mm wall thickness range: 1.2mm to 4mm line direction: right to left speed: 100mpm complete mill with the...

    No price
    Newark, NJ, USA
  • 200 KW THERMATOOL High Frequency Welder w/Heat Exchanger #2854

    • Manufacturer: THERMATOOL

      Heat exchanger induction arm type: induction welding | output power: 200 kw | primary volts: 460/30/60 hz | output frequency: 400 khz

      No price
      Perrysburg, OH, USA
    • 3″ (76.2 mm) x .160″ (4.06 mm) ALPHA/THERMATOOL Double Cut Flying Tube Cut Off #3431

      • Manufacturer: Alpha

        (1) hydraulic clutch (1) double cut die set (1) ac servo die accelerator (1) 30 hp motor missing control cabinet 17′ x 7′ x 8′ 14,000 lbs. universal warehouse, perrysburg, ohio prospective purchasers are advised ...

        No price
        Perrysburg, OH, USA
      • 3" (76.2 mm) x .160" (4.06 mm) ALPHA/THERMTOOL Flying Double Cut-Off

        • Manufacturer: Alpha

          (419) 872-2364 / sales@utubeonline.com 3" (76.2 mm) x .160" (4.06 mm) alpha/thermtool flying double cut-off, stock #3431 model number: - trc-3007 specifications: - maximum tube o.d.: 3" (76.2 mm) ...

          No price
          Perrysburg, OH, USA
        • 2-1/2" (63.5mm) x .160" ALPHA Flying Tube Cut-Off

          • Manufacturer: Alpha

            419-872-2364 / sales@utubeonline.com 2-1/2" (63.5mm) x .160" alpha flying tube cut-off, stock #3259 manufacturer: - thermatool alpha model number: - ae-935 serial number: - 8016 age: - 19...

            No price
            Perrysburg, OH, USA
          • 3″ (76.2 mm) x .134″ (3.40 mm) ALPHA #SR-12-30/45 Flying Cut-Off #1920

            • Manufacturer: Alpha

              note: missing motor & fly wheel | maximum cuts/min.: 50 | maximum mill speed: 300 fpm | maximum tube diameter: 3″ (76.2 mm) | minimum tube diameter: 1/2″ (12.7 mm) | maximum wall thickness: .134″ (3.40 mm) | min...

              No price
              Perrysburg, OH, USA
            • 200 KW THERMATOOL #TI 200 High Frequency Welder #2855

              • Manufacturer: THERMATOOL

                Induction arm type: induction welding | output power: 200 kw | primary volts: 460/30/60 hz | output frequency: 400 khz

                No price
                Monterrey, Mexico
              • 2″ (50.8 mm) ALPHA #35-19-5, 4-Post Flying Tube Cut-Off #1896B

                • Manufacturer: Alpha

                  Minster clutch blade mister external lube pump & motor no die set

                  No price
                  Perrysburg, OH, USA
                • 130mm X 6mm OTO MILLS RAFTED TUBE MILL LINE / MAIR PACKAGING LINE

                  • Manufacturer: BS-vognen
                  • Capacity: 25,000#

                  Oto mills rafted high speed tube mill line featuring: year 1992 model 1276 wall thickness: 1.5mm - 6.0mm coil width: 100mm - 410mm coil tube diameter: 34mm - 114.3mm max square: 101.6mm x 101.6mm & min s...

                  No price
                  Newark, NJ, USA