• 1987 Tschudin HTG410 Cylinderical Grinder

    • Manufacturer: Tschudin

      diameter: 300mm | rotatable: 360 degrees | center dist: 400mm | condition info: very good | grinding wheel width: 60mm

      No price
      Barrington, IL, USA
    • TSCHUDIN PL65A CNC Angle Head Grinder

      • Manufacturer: Tschudin

        1998 tschudin pl65a cnc angle head grinder fanuc 18g control center hight 100mm distance between centers 450mm grinding wheel diameter 500mm various accessories: marposs gauging coolant filter system and standard...

        No price
        Livonia, MI, USA
      • 12" x 28", TSCHUDIN, No. PL66,

        • Manufacturer: Tschudin
        • Grinding Length: 650mm

        equipped with: fanuc 16tb 2-work rests pulse generator marposs gauge p-5 sbs 4500 balancer tailstock mount dresser barnes chip separator w/mag & paper filtration coolant w/mag paper hydraulic unit light curtain ...

        No price
        Warren, MI, USA
      • TSCHUDIN Super-Precisio

        • Manufacturer: Tschudin

          1974 tschudin htg-430 cylindrical grinder w/ radius dresser description: this particular machine has been completely rebuilt by our factory trained service tech and the geometry of the machine has been brough bac...

          $39,500
          Fullerton, CA, USA
        • 8" x 12" TSCHUDIN 395646

          • Manufacturer: Tschudin

            8" x 12", tschudin, no. pl24, 2001, cnc conv'l control, marpose gauging click the link below to view a video demonstration of this machine new 2001 made in switzerland, from an illinois medical device manufacture...

            No price
            Longmont, CO, USA
          • 2001 7.8" X 11.8" TSCHUDIN CNC PLAIN CYLINDRICAL GRINDER 17801

            • Manufacturer: Tschudin

              model pl24 made in switzerland, from medical device manufacturer usach open architecture conversational cnc control, upgraded in 2014 from fanuc series 18 control, uses fanuc hardware marposs p5 gauging system sb...

              No price
              Des Plaines, IL, USA
            • 1970 TSCHUDIN HTG-600 35572

              • Manufacturer: Tschudin

                (1) used 8" x 24" tschudin htg-600 precision universal id/od cylindrical grindernew 1970specifications:center height 3.9"swing: 7.8"distance between centers 23.6"grinding wheel dims 17.7" x 1.96" x 7.99" boregrin...

                No price
                Los Angeles, CA, USA
              • 1970 8" Swing 16" Centers Tschudin HTG-400 OD GRINDER, SWING DOWN I.D. ATTACH., HYD. FULLAUTO CYCLE

                • Manufacturer: Tschudin
                • Weight: 4,700 LBS

                8" x 16" tschudin "swiss" high precision universal i.d./o.d. cylindrical grinder model: htg-400 s/n: 701394 new: 1970 maximum swing over table ........................... 8" nominal distance between centers ........

                No price
                Harrison, NJ, USA
              • 1985 7.75" x 17" Tschudin HTG52 Type 365 CNC Anglehead Grinder

                • Manufacturer: Tschudin

                  equipped with: marposs e14 controller. marposs e20 gap eliminator. flag gauge for shoulder location/edge finder. manobalance wheel balancer. combination live/dead headstock. lever type tailstock. collet chuck wit...

                  No price
                  Lincolnwood, IL, USA
                • Tschudin,TC30,Min.Dia. 0196", max.Dia. 1.18", 5" wide wheel.,Marposs CNC, #30258

                  • Manufacturer: Tschudin
                  • Weight: 5,000 Lbs.

                  serial no. 88321-9 new - 1989 specifications: equipped with: marposs e54 cnc motion contol manual push button pendant control regartron regadrives slo-syn synchronous stepping motor manobalance dynamic wheel bal...

                  No price
                  Lincolnshire, IL, USA