Used union bft

- 136 listings found
Sort by Price: Low to High | High to Low
  • 1977 Union BFT 125/5 27879

    • Manufacturer: Union
    • Spindle Diameter: 5.12"

    Pendant controls 55" x 63" built in rotary table power draw bar digital readouts 32" diameter facing head 4-way bed design 35 hp spindle drive

    No price
    Melville, NY, USA
  • 1985 Union BFT 130

    • Manufacturer: Union
    • Spindle Diameter: 5"

    19" spindle support 30" facing head tailstock x travel: 63" | y travel: 55" | table width: 71" | table length: 78" | spindle drive: 35 hp | spindle taper: no 50 | spindle diameter: 5" | z travel (quill): 40" | w ...

    No price
    Smyrna, TN, USA
  • Union BFT 125

    • Manufacturer: Union
    • Spindle Diameter: 5"

    Built-in facing head width: 55" | length: 111" | x-axis: 120" | motor (hp): 30 | spindle taper: mt | w-axis (saddle): 144" | spindle diameter: 5" | z-axis (spindle): 36" | y-axis (vertical): 120" | maximum spindl...

    No price
    Smyrna, TN, USA
  • 1967 Union BFT 100/IV 25440

    • Manufacturer: Union
    • Spindle Diameter: 3.93"

    Newall 3-axis digital readout built-in facing head built-in rotary table newall 3-axis digital readout 27" diameter facing head set-up for outboard support table outrigger built in to bed machine is set up for ou...

    No price
    Melville, NY, USA
  • 1992 Union /2015 BFT 90/3-2 Heidenhain iTNC 530

    • Manufacturer: Union
    • Spindle Diameter: 4"

    equipment: retrofitted in 2015 installation and training can be offered at additional cost | table size: 49"x55" | spindle motor: 15 hp | spindle taper: iso 50 | y axis travel: 48" | z axis travel: 56" | spindle...

    No price
    Dundee, FL, USA
  • bench drill WMW Union BFT 90/3

    • Manufacturer: Union

      spindle taper: sk 50 | table size [mm]: 1250x1400 | speed range [1/min]: 8-1600 | equipment / accessory: dro, coolant device, rapid feed

      No price
      Chemnitz, Germany
    • 1976 UNION BFT 130/5

      • Manufacturer: Union

        Spindle diameter: 130mm, traverse table path: 1600mm, vertical adjustment of drilling sledge: 1600mm, drilling depth: 1000 mm, spindle mount: iso 50, rotational speed: 7-900/min, table clamping size: 1600x1400mm,...

        No price
        Berlin, Germany
      • Table Type Boring and Milling Machine UNION BFT 80/2

        • Manufacturer: Union
        • Spindle Diameter: 80 mm
        • Control: konventionell

        Without rake angle! feed: 0,03 - 1,5 mm/u | state: used machine | w-axis: ca. 1000 mm | control: konventionell | age info: unbekannt | division: metal processing | x-travel: ca. 1400 mm | y-travel: ca. 1200 mm | ...

        No price
        Königswalde, Germany
      • 1976 Table Type Boring and Milling Machine UNION BFT 130/5

        • Manufacturer: Union
        • Spindle Diameter: 130 mm
        • Control: konventionell

        feed: 0,63 - 2000 mm/min | state: used machine | control: konventionell | voltage: 380 v | division: metal processing | more info: on request | quotation: ex foundation | table load: 8 t | delivery time: immedia...

        No price
        Königswalde, Germany
      • Union BFT 125/5 (11.077A)

        • Manufacturer: Union
        • Spindle Diameter: 125

        Including: outriggers facing head d.r.o. spindle support pendant control mail us for more information and pictures!

        No price
        Nijkerk, Netherlands