• 0.0938" Dia. 8.5" Feed L US Baird RW1 4-SLIDE MACHINE WIRE FORMER

    $7,950 - Harrison, NJ
    • Manufacturer: US Baird

    3/32" baird 4-slide wire forming machine model #rw1 s/n 5520-83 maximum wire diameter .............. 3/32" maximum width strip material ....... 1-1/2" standard feed length ............... 8-1/2" st...

  • US Baird 2H 2 cu.ft. tumbling barrel, hydraulic dump

    $7,250 - Connecticut, USA
    • Manufacturer: US Baird

    baird 2h tumbling barrel, 2 barrel dims 22" dia opening x 25" base dia x 26" depth. automatic hydraulic dump system motor 1 hp, 220/440 volt timer ---no liner---

  • US BAIRD MODEL #3 FOUR SLIDE WIRE FORMING MACHINE

    No price - Newark, NJ
      • Capacity: 3/16" BASIC WIRE
      • Weight: 2300#

      capacity: 3/16" basic wire 1-1/8" ribbon metal feed length: 10" oper. speed: 120 rpm equipped with: mech. clutch 14 roll 2 plane straightener motor drive: 3 hp, 230/460/60/3 ...

    • US BAIRD MODEL #4-30, 4-SLIDE WIRE FORMING

      No price - Newark, NJ
        • Capacity: 1/4" BASIC WIRE

        capacity : 1/4" basic wire 1-1/4" ribbon metal feed lenggth w/stops: 30" oper. speed: 60 rpm front, rear, left, right hand slide equipped with: mechanical clutch 2-plane 14 roll strai...

      • US BAIRD MODEL #11 MULTI-SLIDE WIRE FORMING MACHINE

        No price - Newark, NJ

          length of feed ................. 3" maximum width of stock ......... 3/4" maximum thickness of stock ..... 1/32" motor data: 1-1/2 hp, 220/440v, 3ph, 60cyc, 1800 rpm with controls an...

        • US BAIRD MODEL 28 FOURSLIDE

          No price - Ivyland, PA
          • Manufacturer: PPM

          speed range: 60-240 ppm | maximum width strip: 1-1/2" | standard feed length: 8 | maximum stock thickness: 1/16"

        • US BAIRD MODEL #3 FOURSLIDE

          No price - Ivyland, PA
          • Manufacturer: BAIRD
          • Capacity: 3/16"
          • Weight: 2,300 LBS

          equipped with: mech. clutch, 14 roll 2 plane straightener, motor drive w/controls, v.s. drive

        • US BAIRD MODEL #3 FOURSLIDE

          No price - Ivyland, PA
          • Manufacturer: BAIRD
          • Capacity: 3/16"
          • Weight: 2,300 LBS

          equipped with: verticle tool post, mech. clutch, 14 roll 2 plane straightener, stop check, motor drive w/controls, v.s. drive; front, rear, left & right slides tooling

        • 1967 US BAIRD 437 eyelet transfer stamping press, 2.5" Stroke, 45 ton, 9 station die-set

          $119,000 - Michigan, USA
          • Manufacturer: US BAIRD

          us baird 437 transfer press. 45 tons. ram stroke 2.5"(63.5mm). max draw: 1.10"(28mm). shut height 15.25"(387mm). ram width 37"(938mm). cup tonnage 2.30 tons. speed 60-160 spm. die set: 9 station ce...

        • US BAIRD FOUR SLIDE

          No price - Newark, NJ

            -------------------------------------------------------------------------------...