• DeMarco MV20E Stationary "Max-Vac" Hi-Vac System

    No price - Brook Park, OH Recently Added
    • Manufacturer: DeMarco

    480 cfm demarco #mv20e stationary "max-vac" hi-vac system, features three-stage two compartment filtration: cyclone deflector, laterally offset cyclone, filter chamber with reverse jet pulse cleani...

  • VAC-U-MAX LOADER CONVEYOR, S/S

    No price - Cleveland, OH Recently Added
    • Manufacturer: VAC-U-MAX

    one (1) used vac-u-max loader conveyor, stainless steel construction, with feed bin, approximately 28" diameter, 3 cu ft working capacity with bottom magnet, 22" diameter vac-u-max receiver with to...

  • VAC-U-MAX LOADER CONVEYOR, S/S

    No price - Cleveland, OH Recently Added
    • Manufacturer: VAC-U-MAX

    one (1) used vac-u-max loader conveyor, stainless steel construction, with feed bin, approximately 28" diameter, 3 cu ft working capacity with bottom magnet, 22" diameter vac-u-max receiver with to...

  • JET-VAC STEAM JET BOOSTER

    No price - La Porte, TX
    • Manufacturer: JET Tools

    jet-vac steam jet booster; size 8" x 8"; approximately 56 3/4" long; 8" x 8" inlet/outlet; load 14#/hr air, suction 1mm hga, discharge 10mm hga, motive consumption 46#/hr;

  • 30" ARTISAN JET-O-VAC BAROMETRIC CONDENSER

    No price - Cleveland, OH Recently Added
    • Manufacturer: JET Tools

    one (1) used artisan jet-o-vac barometric condenser, rated 300 gpm, 30" diameter, rated 15 psi and full vacuum at 250 f, serial# jv-8976ko, built 1995

  • Busellato Extra long 4'x20' 4 Axis CNC Pod & Rail

    $37,800 - United States
    • Manufacturer: Busellato

    midwest this machine has been very well maintained with low hours of useage.  still under power for inspection. 11kw electrospindle hsk-63f  24,000 rpm 18 position atc c axis 200 cubic meter becker...

  • Calypso Hammerhead Water-Jet

    No price - Duarte, CA
    • Manufacturer: JET Tools

    stock id: #7762 specifications: hammerhead 12'x6' gantry cutting system complete control console single abrasive system kmt 30hp intensifier nc geomate nc console high pressure tubing an...

  • 2011 HK FL-3015 5000 WATT, 5' X 10'

    No price - New York, NY
    • Manufacturer: Screen

    table size: 62" x 123" maximum rapid travel: 7800 ipm maximum rapid travel x axis: 4720 ipm maximum rapid travel y axis: 5930 ipm accuracy: 0.0039" over 120" repeatability: 0.001" operating softwar...

  • 2007 Flow STONECRAFTER 35479

    No price - Los Angeles, CA
    • Manufacturer: Flow

    6' x 12' flow "stonecrafter" waterjet cutting machine this configuration incorporates a design that combines the motion control, pump and high-pressure components of a waterjet cutting tool into on...

  • 2007 Flow STONECRAFTER 35508

    No price - Los Angeles, CA
    • Manufacturer: Flow

    6' x 12' flow "stonecrafter" waterjet this configuration incorporates a design that combines the motion control, pump and high-pressure components of a waterjet cutting tool into one compact machin...