• FANUC S-420iF Robotic Spot Welding Arm w/ F-23255 RJ2 Controller 30A 480V

    $7,900 - Fleetwood, PA, USA Recently Added
    • Manufacturer: Fanuc

    fanuc s-420if robotic spot welding arm w/ f-23255 rj2 controller 30a 480v this item is used. pictures above and details below for more i ...

  • Danuser F-8

    $2,900 - Lexington, NC, USA
    • Manufacturer: Danuser

    pto driven danuser auger w/ 5 bits: 24", 16", 12", 8", 6" - cost to purchase new is over $4,500.00

  • W.F. Wells 25″ Band Saw for Sale

    No price - Salt Lake City, UT, USA
    • Manufacturer: W. F. Wells

    make: w.f. wells model: b-25 ii cutting capacity: rounds: 25.5″ rectangles (90 degrees): 25″ x 40″ rectangles (45 degrees): 25″ x 24″ maximum weight capacity: 9,000 lbs sawing force: 30-200 ...

  • Larick Model 410 F Shaper/Sander

    $17,900 - Sheboygan, WI, USA
    • Manufacturer: Larick

    7.5 hp shaper motor, 480 v, 3 phase 4,000-7,000 rpm 1.25" spindle size two 2 hp motors sanding station 400 to 1800 rpm sanding station speed up to 9" wheel diameter 6" wide conveyor system with 4 s...

  • 2008 FORD F-650XLT Flatbed Truck

    $52,750 - Olive Branch, MS, USA
    • Manufacturer: Ford
    • Mileage: 104,000
    • Suspension: Air Ride

    104k actual miles! , cummins 6.7l isb , allison 6spd automatic, state owned by fire dept, serviced at ford dealer every 3k miles, non smoker,11' flatbed with goosneck hitch, all original.

  • 2015 Ford F350 XL – Service Utility Truck w/ Crane – 4WD 6.7L Diesel

    $65,373 - Dassel, MN, USA
    • Manufacturer: Ford
    • Mileage: 19942

    2015 ford f-350 xl – service utility truck w/ 15ft crane. 6.7l v8 power stroke diesel. automatic. 4wd. 300hp. 176″wb. 3200lb auto crane. 3203prx. 23 cfm @ 175 psi gas powered air compressor – 14hp ...

  • 2005 FORD F-650

    $42,500 - Verona, KY, USA Recently Added
    • Manufacturer: Ford
    • Model: F-650
    • Mileage: 18,238

    hours: 18250 engine:cummins isb200, 200hp mileage:18,238 a / c: capacity:2000 gal hose reel: g v w:front 8,500, rear 17,500, 26,000 gvw spray heads:2 front, 2 rear, 1 side pto: self load:

  • Egan 10,000L Model M1001-30 Presspartnet Auto Centering Reel w/ Model S30-620 5 Roll Straightner x 20” W x .125”Egan 10,000L Model M1001-30 Presspartnet Auto Centering Reel w/ Model S30-620 5 Roll Straightner x 20” W x .125”

    $9,400 - Watertown, CT, USA Recently Added
    • Manufacturer: Egan

    egan 10,000 pound m1001-30 auto centering reel maximum coil weight:              10,000# maximum coil diameter:            50" maximum coil width:               30" coil inside diameter approx.:   ...

  • GIDDINGS AND LEWIS 42"CNC VTL w GE Fanuc 18i

    No price - Cleveland, OH, USA
    • Manufacturer: General electric

    rebuilt & retrofitted in 1998 with ge fanuc 18 i cnc control 5000 hrs chip cutting since rebuild diameter of table - 42" dia. 4-jaw max swing - 49 1/2" dia. max under tool - 36" with power adjusta...

  • MPG F-56HB UNDER THE PRESS 12665

    No price - Elk Grove Village, IL, USA

      mpg model f-56hb under the press feed roll granulator, s/n none, 8″ x 56″ feed throat, 3 knife (12 segment) rotor, 2 bed knife (8 segment) rotating end disks, 20 hp 460 volt rotor motor, floor moun...