• 1994 Wasino LG-7 CNC Gang Lathe with Robotic Load / Unload 3270

    No price - Plymouth, MN, USA Recently Added
    • Manufacturer: Wasino
    • Spindle Bore: 1-9/16"

    fanuc ot cnc control, s-robo-1 robotic load / unload system, 10 position adjustable rotary work stocker with small parts conveyor, howa 5.25" 3-jaw hydraulic chuck, 6.5" x 22" gang slide, rear disc...

  • 1994 Wasino LG-7 CNC Gang Lathe with Robotic Load / Unload 3271

    No price - Plymouth, MN, USA Recently Added
    • Manufacturer: Wasino
    • Spindle Bore: 1-9/16"

    fanuc ot cnc control, s-robo-1 robotic load / unload system, 10 position adjustable rotary work stocker with parts conveyor, howa 5.25" 3-jaw hydraulic chuck, 6.5" x 22" gang slide, rear discharge ...

  • 1998 Wasino LG-6 Gang Type CNC Turning Center

    No price - Lincolnwood, IL, USA
    • Manufacturer: Wasino
    • Spindle Bore: 1.8"
    • Spindle Nose: A2-4

    equipped with: fanuc o-t cnc control. s-robi-1 gantry loader-unloader with trays. mist colelctor. coolant. chip conveyor. gang tool slide. hardinge 16c collet chuck. miscellaneous tool holders.

  • 1994 Wasino LG-6 Gang - Style Cnc Lathe

    No price - Barrington, IL, USA
    • Manufacturer: Wasino
    • Spindle Bore: 1.8"
    • Spindle Nose: A2-4

    equipped with: fanuc o-t control 5c collet chuck gang slide with hardinge top change tool plate (2) boring holders (1) static tool holder coolant pump and tank filtermist mist collector

  • 1985 23" X 25" Wasino CNC Lathe

    No price - Navasota, TX, USA
    • Manufacturer: Wasino

    weight: 9,680 lbs. | control: fanuc 6tb | chuck size: 15" 3 jaw | dimensions: 154" x 117" | main motor: 20 hp. | travel x axis: 11" | travel z axis: 25" | condition info: very good | spindle speed...

  • 1988 Wasino /2014 SE-64

    No price - Dundee, FL, USA
    • Manufacturer: Wasino

    equipment: 3 axis auto cycle reconditioned in 2014 incremental downfeed flood coolant manual dresser filtration system | chuck size: 24" x 12" | wheel hole: 5" | main mortor: 5 hp | wheel width: 4...

  • Amada Wasino G-06 FANUC 21TB 343266

    No price - Longmont, CO, USA
    • Manufacturer: Amada
    • Spindle Bore: 1.75"

    amada wasino g-06, fanuc 21tb, 5.25"chk, 2011, 4-gang turret, w/gantry robot equipped with (buyer must verify all details below): fanuc 21itb cnc control 4-station gang turret 5.25" chuck coolant g...

  • 1996 WASINO LG-6

    No price - Santa Ana, CA, USA
    • Manufacturer: Wasino

    mfg: wasino | mpn: lg-6 | power: 5 hp | swing: 15.75 inch | maxrpm: 5000 rpm | region: midwest | weight: 3750 | control: cnc (fanuc 0t) | catalogid: 1799 | tailstock: no | dimensions: 66 x 66 x 70...

  • 2009 AMADA WASINO JJ3/SR1N

    No price - Santa Ana, CA, USA
    • Manufacturer: Amada

    mfg: amada | mpn: wasino jj3/sr1n | region: midwest | control: cnc (fanuc 31i model a) | catalogid: 3283

  • 1992 WASINO LG-6

    No price - Santa Ana, CA, USA
    • Manufacturer: Wasino

    mfg: wasino | mpn: lg-6 | power: 5 hp | swing: 15.75 inch | maxrpm: 5000 rpm | region: midwest | weight: 3750 | control: cnc (fanuc 0t) | catalogid: 1799 | tailstock: no | dimensions: 66 x 66 x 70...