• Zdas mobile straightening press 400 ton H-frame presses

    No price - Deinze, Belgium
    • Manufacturer: SEC
    • Capacity: 400 ton
    • Stroke: 1000 mm

    gantry straightening press >> for straightening shafts, steels castings, rolled products, open-die forgings, flat steel but also pressing in/out bearings, bushes, shrink rings,... type cdn 400-b ...

  • Zdas mobile straightening press 400 ton Horizontal presses

    No price - Deinze, Belgium
    • Manufacturer: SEC
    • Capacity: 400 ton
    • Stroke: 1000 mm

    gantry straightening press >> for straightening shafts, steels castings, rolled products, open-die forgings, flat steel but also pressing in/out bearings, bushes, shrink rings,... type cdn 400-b ...

  • 1978 ŽĎAS CDN 400 B #151481

    No price
    • Manufacturer: ŽĎAS
    • Stroke: 1000 mm

    the machine is in very good condition. drawning speed 42 mm/sec. working speed 1 mm/sec. dimensions of table 6100 x 3100 x 510 mm. dimensions of frame 4300 x 1000 x 3030 mm. dimensions of cylinder ...

  • 1986 ZDAS CDN 400 C

    No price - Czech Republic Recently Added
    • Manufacturer: ZDAS

    nominal press - 400 t table - 3100x6000 mm grto7ax weight of machine - 44 t

  • 1986 ZDA 240 bed trailer De Angelis - ROAD - LEGAL

    No price - Tuscania, Italy Recently Added
    • Manufacturer: De angelis

    trailer de angelis zda 240 flatbed trailer with 3 axle loads net load 192 + 22 of tolerance (total useful 214 ) spring rear ramps approachable to the center total floor length mt 8.00 mt wheel leng...

  • ŽDAS LKJP 400 # 12126

    No price - Czech Republic
    • Manufacturer: ŽDAS

    the machine is in good technical condition, after agreement the possibility to test it under power.

  • 1999 ZDAS LKJP 400 # 3461

    No price - Czech Republic
    • Manufacturer: ZDAS

    the machine is in good technical condition, after agreement the possibility to test it under power.

  • 1961 ŽĎAS LVH 2500 # 367

    No price - Czech Republic
    • Manufacturer: ŽĎAS

    the machine is in good technical condition, after agreement the possibility to test it under power.

  • 1965 ZDAS LUD 500 # 9897

    No price - Bulgaria
    • Manufacturer: ZDAS

    the machine is in good technical condition, after agreement the possibility to test it under power.

  • 1986 ŽĎAS CDN 400 C # 9551

    No price - Czech Republic
    • Manufacturer: ŽĎAS

    the machine is in good technical condition, after agreement the possibility to test it under power.