Used processing

Dryer-Fluid Bed 340 L (89.8 gallons) Stainless Steel 304 - IPP# 101059

• Manufacturer: Aeromatic-Fielder AG

fluid bed dryer system 50-250 Kg With cylindrical chamber the rupture channel 950mm dia x 2345mm high Filter housing rated 2 bar and has volume of 1638 liter. Filter area 13 sq meter. W/(2) 304SS product bins, ra...

Desiccant Dryer-Air - IPP# 213833

compressed air dryer self recharging desicant type with carbon filter designed for filtering breathing air

Dryer-Thin Film 16 m² (172.2 ft²) Stainless Steel 316L - IPP# 70254

• Manufacturer: Luwa SMS

thin film continuous contact dryer, dryer has 3 segments: each segments: internal pressure rated -1/0,5 bar @ 200 degrees C, total volume 1570 liter, jacket pressure rated 10 bar @ 200 degrees C, total volume 150...

Dryer-Thin Film 11 m² (118.4 ft²) Stainless Steel 316L - IPP# 70264

• Manufacturer: Luwa SMS

thin film continuous contact dryer. pressure internal 0.5 bar and full vacuum @ 220 degrees C. Jacket rated 13 bar @ 220 degrees C, Shell 850mm diameter x 4800mm long, Rotor was driven by 30 KW, 3/50/380 volt, 26...

Dryer-Thin Film 7.5 m² (80.7 ft²) Stainless Steel 316L - IPP# 70268

• Manufacturer: Luwa SMS

thin film continuous contact dryer (cooler) Jkt rated 8 bar @ 50 deg C Shell 600mm dia (24") x 4.492m (177") long

Dryer-Thin Film 7.5 m² (80.7 ft²) Stainless Steel 316L - IPP# 70266

• Manufacturer: Luwa SMS

thin film continuous contact dryer (cooler). Jkt rated 8 bar @ 50 deg C, Shell 600mm dia (24") x 4.492m (177") long.

Dryer-Thin Film 7.5 m² (80.7 ft²) Stainless Steel 316 - IPP# 70270

• Manufacturer: Luwa SMS

thin film continuous contact dryer (cooler). Jkt rated 8 bar @ 50 deg C, Shell 600mm dia (24") x 4.492m (177") long. Rotor driven by 25 KW, 3/50/380 volt motor, 260 rpm output speed.

Dryer Thin Film Luwa SMS DK600/4500/10 Stainless Steel 316 - IPP# 70267

• Manufacturer: Luwa

thin film continuous contact dryer (cooler) Jkt rated 8 bar @ 50 deg C Shell 600mm dia (24") x 4.492m (177") long

Stainless Steel Austenitic Buss-SMS-Canzler GmbH D-015 Dryer-Thin Film - IPP# 236136

• Manufacturer: Buss

jacketed thin film dryer, fabrik #0500/187, shell jackets 15 bar @ 300 degrees C (2 x 38 liter) 569mm diameter x 3.6m, rotor driven by 27kw, 3 phase, 50Hz, 400 volt, 1000 rpm Eexe 11 T2, IP55 motor, rotor speed 3...

Dryer-Thermal Disc 1,219 mm (48 in) Carbon Steel - IPP# 96719

• Manufacturer: Bepex

Torus disc cooler

Stainless Steel 304 Strong Scott Dryer- Ribbon & Paddle - IPP# 39460

• Manufacturer: Strong Scott

24" diameter x 15' long jacketed Solidaire dryer Rotor has adjustable pitch paddles and was Openings: top 1-6" feed end, 1-6" and 1-6" discharge

Dryer- Ribbon & Paddle 11.3 m3 (400 ft3) Carbon Steel - IPP# 96808

• Manufacturer: Bepex

Continuator, Trough inside dimensions 69" diameter x 195" long, 214 Square foot heating surface. with a dome top cover, 25% of the dome cover has panel coils. The rotor is 18" diameter with 8" stub shafts, packin...

Stainless Steel Austenitic Drais TR16000 Dryer- Ribbon & Paddle - IPP# 706875

• Manufacturer: Drais

2060mm diameter, jacketed Turbulent Paddle mixer/reactor, 16000 liter internal capacity, Fabrik #54279, Herst #4628, 2060mm diameter x 4.1m straight side, weld dished ends, Paddle speed 15-45 rpm, belt driven by ...

Stainless Steel 321 Bonazzi Mario 881 LT 1000 Dryer-Pan - IPP# 230333

• Manufacturer: Bonazzi Mario

(Inside and outside)Stainless Steel Vacuum Pan Dryer jacketed Bolted dish top with weld Flat bottom. Openings: top (1) 12", (2) 2", (1) 4", (1) 6", (1) 8", 3" sightglass, and 4" sightglass. Associated explosion p...

Dryer- Nauta / Conical 10,000 L (2,642 gallons) Stainless Steel 316 - IPP# 231223

• Manufacturer: Nauta

pressure -1/3.2 bar @ 250 degrees C single stainless steel screw, screw bottom driven dished top with a 316Ti (1.4571) stainless steel reverse jet filter, pressure -1/3 bar @ 165 degrees C (1220 liter), bolt dish...