Used processing in Washington, USA

Chain transfer 4 strand conveyor 7ft x 9ft

9ft wide x 7ft long 2 Shaft mounted motors one motor for each pair of chains ( view photos for detail) 480 volt 2.5HP/1.8 kw motors Roller chain spacing is 26” apart from the left set and right set of chains ( v...

Stainless steel screw auger conveyor 20ft length x 16”

16” diameter screw auger, 20ft 4 inches long 17” width trough 22ft long overall length 29” tall 1 carrier bearing 1 bottom discharge

Parker/Balston HFXO-3 nitrogen generation system

• Manufacturer: Parker Balston/Whatman

Parker/Balston HFXO-3 nitrogen generation system IEC 1010 LR 91932 115/230 volt 60/50 Hz. max. Inlet pressure 145 PSIG max. Inlet air temp 110F/40C Min. inlet air temp. 60F/15C Serial# HFX03-104B

Quincy 10 HP air compressor, model 340

• Manufacturer: Quincy

Quincy 10 HP air compressor, model 340 32 541261 S 208-220/440 volt 3 phase S.F. 1.15

Westech thickener 115 ft (35 Meter) Column Supported clarifier

• Manufacturer: WesTech

WesTech 115 ft (35 Meter) Column Supported thickener. WesTech clarifier Could be used for 35m paste application or less with slight modification or standard thickener with no modifications. For the paste applicat...

40ft 3 strand chain conveyor with unit lift

• Manufacturer: Unknown

26” height to top of chains 48” outside width of conveyor +- 39” width from the outside to outside of chain ( view photos) Hydraulic Lumber unit lifting for removing or loading units onto chain transfer ( view...

24ft vibrating conveyor, Carrier natural frequency trough conveyor

• Manufacturer: Carrier

24ft vibrating conveyor, Carrier natural frequency trough conveyor 24” wide shaker conveyor 4”+ trough deep 34”+- Overall height 5hp motor, 230/460 volt, TEFC. Prior use dry wood inside of a building Remove...

Eriez Wet Drum Separator magnets 36” x 108”, / 3ft x 9ft long

• Manufacturer: Eriez

Eriez Wet Drum Separator magnets 36” x 108”, / 3ft x 9ft long TWO WET DRUM MAGNETS ARE AVAILABLE Style: 9977079 Serial #s: 174564 – both magnets have the same serial numbers- view data plates in photos cerami...

Donaldson Torit 2DF8 cartridge dust collector

• Manufacturer: Donaldson / Torit / DCE
• Model: DF

Donaldson Torit 2DF8 cartridge dust collector Torit Downflo 2 DF 8 Pulse jet cartridge dust collector Voltage 208-230-460, 3phase 5HP fan 12” fan inlet Additional fans types, sizes and HP available Demonstr...

ITW Muller Rotary arm stretch wrapper, 120 volt

• Manufacturer: Muller

Rotary arm stretch wrapper Model# Cobra 500 Allen-Bradley Panel View 300 Micro touch screen 120 volt, single phase Serial# E1510406 13 amps/ 1.8 KVA/ 60Hz.

16ft Aluminum incline stainless linked belt with cleats conveyor

• Manufacturer: Unknown

Used Aluminum incline cleated hopper conveyor 24” wide stainless linked belt aluminum conveyor 26” conveyor width 16 feet+- long 12” tall sides/walls 16” spacing between aluminum cleats Infeed hopper size ...

shaftless screw conveyor, shaftless spiral conveyor, shaftless tapered screw auger, used 10″ shaftless screw conveyor, hollow screw conveyor, used spiral screw auger conveyor.

• Manufacturer: unknown

shaftless screw conveyor, shaftless spiral conveyor, shaftless tapered screw auger, used shaftless screw conveyors, hollow screw conveyor, used spiral screw auger conveyor. shaftless spiral conveyor inside length...

used Donaldson Torit TD3-54 SEP-300 dust fume collector, used fume collector

• Manufacturer: Donaldson / Torit / DCE

Donaldson used Torit TD 3-54 (SEP-300), pulse jet cleaning, serial# 3833209-1, unit 3, filter# P031852, 7 1/2HP, 208-230/ 460- 415 Volts, Donaldson Torit Delta P control, inlet port size: four 2 inch diameter, Go...

Stainless Steel Fan

• Manufacturer: Unknown

Rader feeder, rebuilt 16 x 10 rader feeder, for sale rader feeder, for sale used airlock.

• Manufacturer: Rader

Rader feeder, rebuilt 16 x 10 rader feeder, for sale rader feeder, for sale used airlock. rader 10″ x 16″ metal wheel, recent paint, overall height 18 inches, gear motors available. wheel feeder,