Used Cnc Lathes in Illinois, USA

Fryer Easy Turn ET-14 CNC Lathe

Imperial Metric Fryer Easy Turn ET-14 CNC Lathe Country: United States | Swing over bed: 14" | Distance between centers: 40" | Swing over cross slide: 7" | Cross slide travel: 7.5" | Spindle thru-hole: 1.562" | S...

2007 HWACHEON Mega T130 50" CNC Lathe ()

• Manufacturer: Hwacheon
• Model: Mega T130

Imperial Metric 50" chuck Hwacheon Mega T130 Heavy Duty CNC Lathe (2007) 50" Chuck, Fanuc 21TB CNC Control Specifications (Preliminary)

Okuma Crown CNC Lathe

• Manufacturer: Okuma
• Model: CROWN

Imperial Metric Country: United States

2012 Victor Taichung VTurn 46 Heavy Duty CNC Lathe with 32" sw, 69" cc, 4.52" Bar Capacity, 68 HP, 15" Chuck, 4 Spd Gearbox

• Manufacturer: Victor
• Model: Vturn-46

Chip Conveyor 15" 3 Jaw Hydraulic Chuck (can accept up to 24" chuck) Programmable Tailstock Air Conditioned Electrical Cabinet High Pressure Coolant RS 232 Port Interface Coolant System with Tank & Pump Boxed...

Bridgeport EZ Path SD 20" x 60" CNC Lathe

• Manufacturer: Bridgeport
• Model: EZ-Path
• Spindle bore: 65.024 millimeter

Imperial Metric Bridgeport Romi EZ-Path SD CNC Flat Bed Lathe Width Of Bed .......................... 13.5" Height Of Bed ......................... 12.5" Tailstock Quill Travel................. 5.11" Tailstock Qu...

2012 DMG Mori NTX 1000/SZM

• Manufacturer: DMG Mori
• Model: NTX 1000
• Spindle bore: 73.65999999999998 millimeter

MACHINE EQUIPPED WITH 5 Axis Simultaneous Control Sub Micron Measuring Specifications 20 Additional External M-Codes Renishaw OMP60 Probing System Renishaw HPRA W/ RP3 Tool Pre-Setter with Case Coolant Tank and C...

2005 Cincinnati Hawk 200 CX2 CNC Lathe ()

• Manufacturer: Cincinnati
• Model: Hawk 200

Imperial Metric Collet Chuck, 3 Jaw Chuck, 20" Swing, Programable Tailstock, Siemens A2100 CNC, Chip Conveyor ( 2 machines available )

2002 Mori Seiki SL-154/500 CNC Lathe ()

• Manufacturer: Mori Seiki
• Model: SL-154

Imperial Metric Mori Seiki SL-154/500 CNC Lathe (2002) Swing Over Bed 26.8" Swing Over Corss Slide 20.1" Distance Between Centers 22.8" Z-Axis 19.3" Maximum Turning Diameter 11.8" Maximum Turning Length 19.7" Tur...

2018 TAKISAWA TCN-2100 L6 CNC Lathe ()

• Manufacturer: Takisawa
• Model: TCN2100 L6

Imperial Metric Fanuc 0iTF CNC Parts Catcher Collet Chuck Chip Conveyor 12 Position Turret All slideways use highly rigid and highly accurate rectangular slides. Continuous rated torque is improved compared to fo...

2013 Takang LB40 X 1200 CNC Lathe ()

Imperial Metric Swing Over Bed - 60" Distance Between Centers - 40" Spindle Bore - 6" Max. RPM - 600 Chuck Size - 36" Control - Fanuc oi-TD

2002 Kingston CL38CX2000 CNC Lathe ()

• Manufacturer: Kingston

Imperial Metric LOW HOURS 1499 hrs total run time FANUC Oi-T Controller 7.080" spindle bore Dual turret - V8 hyd front, H6 Servo rear Front & rear 25" manual chuck 1200 RPM 80" between centers Full enclosure (cov...

2020 Haas ST-10 CNC Lathe W/ Barfeeder ()

• Manufacturer: Haas
• Model: ST-10
• Spindle bore: 58.419999999999995 millimeter

Imperial Metric Comes with Liners for 0.375"-1.5" - 1GB Onboard Memory - 30 Gallon integrated coolant tank with 3/4 HP Pump - 6000 RPM Spindle, 15HP, A2-5 Spindle Nose 1.75" Max bar capacity - Auto Door - 12 Stat...

2018 Hyundai Wia HD200 CNC Lathe ()

• Manufacturer: Hyundai - Wia
• Model: HD2200

Imperial Metric Country: United States

2013 Okuma Genos L400 CNC Lathe ()

• Manufacturer: Okuma
• Model: GENOS L400

Imperial Metric Wired - 220 Volt 3 Phase - OSP P200LA-R Operating system - 12 Tool Turret - 10" Kitagawa Chuck - Renishaw Tool Probing - Chip Conveyor - leveling pads - All original manuals, Documents & Backup Pa...

1999 Mori Seiki ZL15 CNC Lathe

• Manufacturer: Mori Seiki
• Model: ZL-15

Imperial Metric Country: United States