Used Drilling Rigs in Germany

2023 Klemm KR 805-3 GW rig.plus

• Manufacturer: Klemm

+ Direct electronic pilot control + Volvo Penta TAD 583 VE EU 2016/1628 Stage 5 engine + Flushing pump type Gamma 202 / HW + Drill carriage type 202/13 x 8000 + Hydraulic clamping and breaking device type H + Pum...

Geared motor 0,37 kW 87 rpm of BAUER - BG20-37 / D07LA4 15031

• Manufacturer: Bauer
• Model: BG20
• Horsepower: 274.90952821298055 horsepower
• Drilling depth: 40 meter

Gear motor, electric motor Number of revolutions: 87 U/min | Mounting position: B5 | Diameter shaft: Ø 25 mm | Protection type: IP 65 | Number: 1x available | Dimensions: 475/175 / H180 mm | Mass: 20 | Internal s...

Geared motor 0.37 kW 51 rpm with frequency converter from BAUER – BG20-37W 8109

• Manufacturer: Bauer
• Model: BG20
• Horsepower: 274.90952821298055 horsepower
• Drilling depth: 40 meter

Gear motor, electric motor With: integrated frequency converter | Number of revolutions: 51 U/min | Mounting position: B5 | Diameter shaft: Ø 25 mm | Brake: 24 V | Protection type: IP 65 | Mass: 45 | Dimensions: ...

Gear motor 0,37 kW 34 rpm from BAUER - BG20-37/DV08MA4-TOF/MG 29396

• Manufacturer: Bauer
• Model: BG20
• Horsepower: 274.90952821298055 horsepower
• Drilling depth: 40 meter

Geared motor, electric motor, three-phase motor, electric geared motor

2007 RTG RG 20 S drilling rig

Technical data Operating hours 19.900 SENNEBOGEN BS 60 R superstructure CAT C 18 / 470 kW TIER III engine Undercarriage UW 70 R Auger drive KDK 200 Very good condition More information on request

2007 RTG RG 20 S drilling rig

• Horsepower: 630.2803817565896 horsepower

Technical data Operating hours 19.900 SENNEBOGEN BS 60 R superstructure CAT C 18 / 470 kW TIER III engine Undercarriage UW 70 R Auger drive KDK 200 Very good condition More information on request

Gear motor 0.55 kW 55 rpm from BAUER - BG20-37 / DV08LA4-ST-K 14318

• Manufacturer: Bauer
• Model: BG20
• Horsepower: 274.90952821298055 horsepower
• Drilling depth: 40 meter

Geared motor, electric motor, three-phase motor, electric geared motor

Acessories for drilling work Threaded casings

Threaded casings, defective, for use to manufacture of adapers, reducers and so on. In total ap. 37 pcs. with transport rack, in different dimensions, essentially consisting ...

Acessories for drilling work Add-on auger drive (manufacturer )

Add-on auger drive (manufacturer unknown), with guides for DELMAG leader type MD/MH/MA -17 + MH/MS/GF-22. Main and intermediate gearbox with hydraulic motor type SAUER DANFOSS, installed in drilling bell. With h...

Continuous flight augers Concrete / continuous flight augers (CFA): 1 x 2 / 1 x 4 / 1 x 6 m / 2 x starter / drill head type SOB-FBKR (rock)

• Manufacturer: STDS-JANTZ

Concrete / continuous flight augers (CFA): 1 x 2 / 1 x 4 / 1 x 6 m / 2 x starter / drill head type SOB-FBKR (rock). Optional: 1 drive adapter suitable for LIEBHERR double ...

Twister

Type of casing: upper flange | For drilling rig: DELMAG 1413

Twister flange with connection bolts + coupling BADE Ø 1300 mm

flange with connection bolts + coupling BADE Ø 1300 mm

Twister Ø 1300 mm

Ø 1300 mm Type of casing: upper part of twister | For drilling rig: SOILMEC R 412

Twister

Casing-ø mm: 670 | For drilling rig: ABI Typ BK 60/6000

Twister Ø 685 mm

Ø 685 mm, upper coupling part with 4 cams Type of casing: upper part of twister | For drilling rig: ABI / KLEMM