Used Extruders

HOMEMADE CRAMMER FEEDER 11024

Homemade crammer feeder belt driven auger by a 5HP 180-Volt 1,750 RPM DC motor through a gearbox approximately 30″ diameter hopper with 40″ long cone. 25:1 gearbox ratio for 4.5″ extruder heavy duty auger protrud...

EXTEK HSC-25 2.5″ SCREEN CHANGER 18360

One (1) used Extek model EH-25 screen changer having two (2) nominal 2.5″ breaker plates. S/N EH25100. Set up for use on a 2.5″ Gloucester extruder. Cleaned, evaluated, and repaired by Xalloy in 10/2011 and never...

EXTEK HSC-25 2.5″ SCREEN CHANGER 18363

One (1) used Extek model EH-25 screen changer having two (2) nominal 2.5″ breaker plates. S/N EH25098. Set up for use on a 2.5″ Gloucester extruder. Cleaned, evaluated, and repaired by Xalloy in 10/2011 and never...

LCI CORP ES90/90 25 HP 18367

Used LCI model ES90/90 melt pump. S/N 1390. Pump is belt driven by a 25 HP D/C motor direct connected to a gear reducer with 21.:1 reduction pump ratio. Motor RPM 1750/2000. Last used on a 4.5″ 32:1 250 HP extrud...

EDI / NORSDON 50″ SHEET 18832

• Manufacturer: EDI

One (1) used Nordson/ Extrusion Dies Inc Model Ultra-100 heavy duty sheet die with a 50″ slot opening. Integral upper flexible lip and fixed removable lower lip. Adjusting bolts on 1″ centers. 45 degree restricto...

EDI 59″ SHEET DIE 18873

One used Nordson / Extrusion Dies Inc model Ultraflex R-75 59″ heavy duty sheet die. S/N 73-1362-2-3. Integral upper flexible lip and fixed removable lower lip. Adjusting bolts on 1″ centers. 45-degree restrictor...

BATTENFELD / GLOUCESTER 1428HD GRANULATOR 18762

• Manufacturer: Battenfeld
• Model: Gloucester

Used Battenfeld Gloucester Model 1428HD Granulator having a 14” x 28” throat opening. Serial number1428-194. Three knife open rotor with slant cut is belt driven by a 200 HP Motor. Feed hopper modified for convey...

FULLY REBUILT BERINGER 12″ SCREEN 18492

Fresh fully rebuilt Beringer model 1200 Hydraulic screen plate screen changer. 12″ nominal breaker plates. 42″ center-line. With stand and 10 HP hydraulic power pack.2 Available – 2nd unit was put in service for ...

CLOEREN / PRODUCTION COMPONENTS 70″ 18339

One (1) used Cloeren / Production Components model Master-flex HD-40 sheet die with a 58″ slot opening. Heavy duty body. Integral upper flexible lip and fixed lower lip. Adjusting bolts on 1″ centers. 0.040″ flex...

PRODUCTION COMPONENTS 66″ SHEET DIE 18328

One (1) used Production Components Master Flex HD-40 sheet die with a 66″ slot opening. Heavy duty body. Integral upper flexible lip and fixed lower lip. Adjusting bolts on 1″ centers. 0.040″ flex adjustment. Coa...

CONAIR / WORTEX UP755 FEED 18253

• Manufacturer: Conair

Conair / Wortex model UP755 feed roll granulator. 4 knife rotor, 2 bed knife. Rotor is driven by a 20 HP 230/460-volt motor. Interlocked type steel feed rolls powered by a 1 HP A/C motor. Evacuated by a machine m...

LOT OF 2.5″ & 3.5″ 17813

One (1) lot of transfer piping and static mixers, one 2.5″ and one 3.5″

CMS CB61224 COOLING BELT 17790

One (1) used CMS model CB61224 cooling belt measuring 23 ½” wide x nominal 61″ long. Two spring loaded chrome rolls with rotary unions feed the stainless steel cooling belt. Discharge has a pin bat for breaking u...

BROWN 56″ WIDE SHEET CUTTER 17862

Used 56″ wide Brown sheet cutter. S/N 33171. New 2005. Has gear-head score cut cross cut slitting blade and manually adjusted blade carriage.

NORDSON / EDI 66″ SHEET 18225

• Manufacturer: EDI

One (1) used Nordson / Extrusion Dies Inc. heavy duty sheet die. S/N 302600006. Has a 66″ slot opening with five (5) zones of temperature control. Upper sliding lip is adjustable. Fixed removable lower lip. Verti...