Used Punch Presses in Germany

1988 HELMERDING ERH 100 B
- Manufacturer: HELMERDING
Equipment: - Final drive - shaft with 3 bearings - Semi-automatic stroke adjustment - circulating oil lubrication - Hydraulic clutch - Separate hydraulics with oil cooler The machine is partially overhauled by us...
Schmölln, Germany
1958 RICHTER PED 160
- Manufacturer: ambold pressen- und maschinenbau
2003 Modernization / Retrofitting The following work is still to be carried out on the machine: - new control cabinet with ABB SPS - separate two-hand control input with foot switch - Vogel loss lubrication
Schmölln, Germany
Bihler SP 800
- Manufacturer: Bihler
- Stroke length: 30 millimeter
Powerful servo press for stand alone operation or in combination with BIMERIC Easy integration of existing or new follow-on tools with the freely programmable stroke and stroke position adjustment Direct drive vi...
Halblech, Germany
KEPROMA AG DOD 40/100
- Manufacturer: ambold pressen- und maschinenbau
- Demonstration model with branded overhauled control system - NC roll feed servo power with direct drive - plasma nitrided rolls - backlash free drive - strip side guide Performance data at 180 degrees - 1000 st...
Schmölln, Germany
1969 ZEULENRODA PEDN 63/2
- Manufacturer: Zeulenroda
- Power requirement: 6 kilowatt
- inclinable - ram is equipped with breaking plate safety device - table clamping plate - Ram adjustment by means of ratchet - Balluff cam indexing system Machine is not safe for manual insertion operation!
Schmölln, Germany
1978 MÜLLER CD 63.12.14
- Manufacturer: Muller
- Power requirement: 22 kilowatt
- workspace enclosure with Sick light barrier - large plunger with ejector and trunnion clamping piece - foot switch - motorized depth stop in cylinder
Schmölln, Germany
1986 JELSINGRAD BPA 15
- Manufacturer: Jelsingrad
Run only 2 years High-speed Control type: conventional | Storage location: Schmölln | Freight basis: In stock | Pressure: 015 t | Installation height: - mm | Hubzahlen per minute: 200 – 2000 | Table surface: - mm...
Schmölln, Germany
1980 Schuler CR 80-345
- Manufacturer: Schuler
- Model: CR 80-345
- Stroke length: 480 millimeter
Additional Information: - the machine is currently being partially overhauled - The machine has been newly equipped with the following components: * Separate control cabinet with touchscreen including cabling * N...
Schmölln, Germany
1981 MÜLLER SZ 40.30.1
- Manufacturer: Muller
- Model: SZ 40301
- Power requirement: 15 kilowatt
with hydr. Die cushion speeds: Rapid advance speed 240 mm / s continuously adjustable
Schmölln, Germany
1977 SMERAL LENP 40 A
- Manufacturer: Šmeral Brno
- Model: LENP 40 A
- gear train - tiltable - table platen - mechan. Overload protection in the ram (break plate) - pneum. clutch
Schmölln, Germany
1999 SALVI-MULTIPRESS - MP 410S 4 The Progressive Header
- Manufacturer: Carlo Salvi
This: 4 | Max. o: 12 mm | Max.shaft length: 80 mm | Max pieces per min.: 250
Altdorf bei Nürnberg, Germany
1986 PELTZER & EHLERS - GB 35 4 The Progressive Header
- Manufacturer: Peltzer & Ehlers
This: 4 | Max. o: 23 mm | Max.shaft length: 185 mm | Max pieces per min.: 95
Altdorf bei Nürnberg, Germany
1989 OMEGA - 00 (MIni) Double stroke precision header
- Manufacturer: Omega
This: 1 | Max. o: 1.7 mm | Max.shaft length: 10 mm | Max pieces per min.: 350
Altdorf bei Nürnberg, Germany
1978 FIDE - EF-180 Double Stroke Header
- Manufacturer: Fide
This: 1 | Max. o: 14 mm | Max.shaft length: 180 mm | Max pieces per min.: 70
Altdorf bei Nürnberg, Germany
Bihler GRM 80P hybrid
- Manufacturer: Bihler
Powerful machining system for flexible mass production of larger stamped and formed parts as well as sub-assemblies Easy integration of servo axes for easier tooling solutions (high flexibility in case of variant...
Halblech, Germany
Amada EMZ-3510NT Punch Press
- Manufacturer: Amada
- Model: EMZ-3510NT
Good condition Amada EMZ-3510NT Punch Presses available between 2005 and 2011 years. Located in Australia and other countries. Click request price for more information.
Australia