New Machine Tools in Minnesota, USA

Trusted Seller
BURR KING 25 COMBIPAK
- Manufacturer: Burr King
BURR KING (NEW) MODEL 25 COMBIPAK VIBRATORY FINISHER 2.5 CU FT TOTAL VOLUME 2.1 CU FT WORKING VOLUME 20" X 15" X 16" TUB DIMENSIONS - INSIDE 19" MAXIMUM PART LENGTH 100 LBS PART LOAD 150 LBS MEDIA LOAD 1.5 HP MOT...
Dodge Center, MN
Trusted Seller
BURR KING M45 COMBI PAK
- Manufacturer: Burr King
BURR KING (NEW) MODEL M45 COMBI PAK VIBRATORY FINISHER 4.5 CU FT TOTAL VOLUME 3.8 CU FT WORKING VOLUME 15" X 35" X 16" TUB DIMENSIONS - INSIDE 34" MAXIMUM PART LENGTH 225 LBS PART LOAD 250 LBS MEDIA LOAD 1.5 HP M...
Dodge Center, MN
Trusted Seller
ST-36 Parts Tumbler
- Manufacturer: TDP
These Superior Parts Tumblers, are Designed with Quarter Inch Side Walls, 11-Gauge Octagon Side Walls, Two-Ply 3/8" Thick Rubber Lined Belting, Ultra Quiet 3/4HP Electric Motor with a 40:1 Gear Box @ 11Rpm. 120V,...
$3,445 USD
Minnesota, USA
Trusted Seller
AKYAPAK METEOR 1200
- Manufacturer: Akyapak
- Model: Meteor-1200
AKYAPAK METEOR (NEW) MODEL 1200 SINGLE SPINDLE BEAM DRILL LINE 3/16" - 1-9/16" DRILL DIAMETER 1/4" - 1-3/16" TAPPING 12.6" TOOL LENGTH 20 HP SPINDLE 60 HP TOTAL POWER 0 - 3,000 RPM STEPLESS SPINDLE SPEED 20, 33, ...
Dodge Center, MN
Trusted Seller
AKYAPAK 3ADM 1200
- Manufacturer: Akyapak
- Model: 3ADM 1200
AKYAPAK (NEW) MODEL 3ADM 1200 CNC BEAM DRILL LINE WITH AST 1200-500 CNC MITER BANDSAW 3-SPINDLE, 10-AXIS CNC BEAM DRILL LINE - 3 DRILL HEADS - 3/8" - 1-1/2" DRILL CARBIDE AND U-DRILL DIAMETER - 1-1/2" - 2" U-DRIL...
Dodge Center, MN
Trusted Seller
SUMMIT RD6315 RADIAL DRILL
- Manufacturer: Summit
SUMMIT (NEW) MODEL RD6315 RADIAL DRILL 2.25" DRILLING CAPACITY 7.5 HP SPINDLE MOTOR 14.5" - 63" SPINDLE AXIS TO COLUMN 15.375" COLUMN DIAMETER MT 5 SPINDLE TAPER 11.75" SPINDLE TRAVEL 12 SPINDLE SPEEDS 30 - 1580 ...
Dodge Center, MN
Trusted Seller
ACCURPRESS ACCURSHEAR HYDRAULIC SHEAR
- Manufacturer: Accurpress
The North American built Accurshear is a combination of simplicity and strong, proven design. This heavy-duty shear can tackle any application. Models range from 10 gauge x 6 ft all the way to 1” x 20 ft. The st...
Willmar, MN
Trusted Seller
TRAK TRL 2470RX Lathe w/ProtoTRAK RLX Control
- Manufacturer: TRAK
- Spindle bore: 139.954 millimeter
Equipped with: Advanced features w/verify 12” chuck D8 Coolant pump Work light Turret kit-4 tool TRAKing software Converter-DXF
$99,921 USD
Albert Lea, MN
Trusted Seller
BAILEIGH DP-1500VS
- Manufacturer: Baileigh
- Model: DP-1500VS
BAILEIGH (NEW) MODEL DP-1500VS DRILL PRESS DRILL CAPACITY - 1.5" MILD STEEL - 1.75" CAST IRON - 0.937 TAPPING CAPACITY SPINDLE - 245-2000 RPM HIGH - 3 SPEED - 85-540 RPM LOW SPEED - MT4 TAPE - 5.9" TRAVEL - 22.75...
Dodge Center, MN
Trusted Seller
JET JDP-20VS-3 20"
- Manufacturer: JET
JET (NEW) MODEL JDP-20VS-3 20" VARIABLE SPEED DRILL PRESS 20" DRILL TO CENTER OF CIRCLE 1-1/2" CAST IRON DRILLING CAPACITY 1-3/8" MILD STEEL DRILLING CAPACITY 10-7/16" COLUMN TO SPINDLE DISTANCE VARIABLE SPINDLE ...
Dodge Center, MN
Trusted Seller
JET JDP-20EVST-230
- Manufacturer: JET
- Model: JDP-20EVST-230
JET (NEW) MODEL JDP-20EVST-230V ELECTRONIC VARIABLE SPEED DRILL PRESS WITH TAPPING 20" DRILLS TO CENTER OF CIRCLE 1-1/2" CAST IRON DRILLING CAPACITY 1-3/8" MILD STEEL DRILLING CAPACITY 7/8" CAST IRON TAPPING CAPA...
Dodge Center, MN
Trusted Seller
ELLIS 9400
- Manufacturer: Ellis
- Model: 9400
ELLIS (NEW) MODEL 9400 VARIABLE SPEED 20" DRILL PRESS 0 - 1200 RPM SPINDLE SPEEDS 18-1/8" DRILLS TO CENTER 1-1/16" DRILLING CAPACITY-STEEL 1-1/4" DRILLING CAPACITY-CAST IRON 3/4" TAPPING CAPACITY NO. 3 MORSE TAPE...
Dodge Center, MN
Trusted Seller
BAILEIGH DP-1250VS
- Manufacturer: Baileigh
- Model: DP-1250VS
BAILEIGH (NEW) MODEL DP-1250VS DRILL PRESS 1-1/4" MILD STEEL DRILLING CAPACITY 3/4" TAPPING CAPACITY SPINDLE - 245-2000 RPM SPEED - HIGH - 85-540 RPM SPEED - LOW - 20.8" SWING - MT4 TAPER - 5.9" TRAVEL - 36.41" N...
Dodge Center, MN
Trusted Seller
JET J-A5818
- Manufacturer: JET
- Model: J-A5818
JET (NEW) MODEL J-A5818 VARIABLE SPEED FLOOR MODEL DRILL PRESS 15" DRILLS TO CENTER OF CIRCLE 5/8" DRILLING CAPACITY - CAST IRON 1/2" DRILLING CAPACITY - MILD STEEL 7-1/2" COLUMN TO SPINDLE 3" COLUMN DIAMETER 6" ...
Dodge Center, MN
Trusted Seller
JET JDP-20EVST-230-PDF
- Manufacturer: JET
JET (NEW) MODEL JDP-20EVST-230-PDF VS DRILL PRESS W/POWER DOWNFEED CAPACITY - 20" DRILLING TO CENTER OF CIRCLE - 2" DRILLING - MILD STEEL - 1" TAPPING - CAST IRON OR MILD STEEL 10-7/16" FROM COLUMN TO SPINDLE VAR...
Dodge Center, MN