New Processing in New Jersey, USA

- IPP# 211986

• Manufacturer: Hägglunds

UNUSED Hagglunds Viking type MK-64-16300-A0-RN-0100 radial piston type hydraulic motor with rotaing case, high -torque and low speed motor, serial #6114-635343, 16340 cm3/r displacement, 260 Nm/bar torque, 250 ba...

Mellen Co SC13-2-3/3X12v-3Z. Furnace - IPP# 235919

• Manufacturer: Mellen Co

set of four split hinge tubular muffle furnace The split hinge design offers a cooler exterior and ease of loading and unloading. This furnace offers horizontal or vertical operation, and High powered heaters for...

Stainless Steel 316 Stalwart International FBD-30 Dryer-Fluid Bed - IPP# 224580

• Manufacturer: International

30 KG capacity with a mirror polish finish internal and a matt finish external Pharmaceutical GMP rated, and sanitary construction 18KW Electric Heater with a Drying temperature (60 C - 70 C) Compressed air: 6 ba...

Stainless Steel 316L GEA MP 4 Dryer-Fluid Bed - IPP# 233968

• Manufacturer: GEA

Note: Drawings show Mills, we did not get some of them. Suitable for installation in Hazardous areas. Typical working volume is 30-225 liters based on the allowable product density of 1500 kg/m This fluid bed dry...

Carbon Steel Rietz RD-18-P32 Granulator/Disintegrator Pulverizer - IPP# 225386

• Manufacturer: Rietz

construction with 360 degree SS screen. Designed for industrial duty, for mixing and depluming of slurries, pastes, liquids, and resins and shredding Unit has vertical shaft with horizontal rotating knives, 360 d...

Spiral Heat Exchanger Glasslined - IPP# 221734

• Manufacturer: Schott

QVF glass spiral tube heat exchanger DIN150

Stainless Steel 304 Shell and Tube Heat Exchanger - IPP# 216127

• Manufacturer: Graham

Flash condenser for a column condenser (IPP # 216020) Duty: 2,957,440 BTU/hr.

Plate and Frame Heat Exchanger 182.8 m² (1,968 ft²) Hastelloy - - IPP# 216154

spare plate pack for Heat exchanger IPP # 216118 ( EQ 4161) 59 plates at 33.36 sq.ft. per plate

Plate and Frame Heat Exchanger 259.2 m² (2,790 ft²) Stainless Steel 316 - IPP# 214853

• Manufacturer: Alfa Laval

CRN L-4646.57 frame plates are SA-516-70 CS With (418) channel plates print weight is 6247 lbs

Stainless Steel 316 Stalwart international BPEFP Pressure Leaf Filter - IPP# 222032

• Manufacturer: International

vertical sparkler type filter cGMP rated and sanitary construction buff polished to a mirror finish Rated for 3.5 kg/cm2 With a cake holding capacity of 64 Liters 18" x 15. (15 plates) Main filter body bolts toge...

Pressure Leaf (Funda) Filter Stainless Steel 304 Chemap A10 - IPP# 89349

• Manufacturer: Chemap

Funda filter with centrifugal discharge Shell 900mm diameter x 960mm from flanged top to bottom discharge (22) 800mm diameter filter elements @ 30mm spacing Requires 15 PS motor Wet cake discharge

Pan Filter 1.11 m² (12 ft²) Stainless Steel 316 - IPP# 31299

• Manufacturer: Filter-1

tipping vacuum pan filter Completely enclosed in 316 stainless steel housing Discharge is through cone 18" diameter.

Carbon Steel Cartridge And Candle Filter - IPP# 206740

• Manufacturer: Crall Products

cartridge filter MDMT is 0 degrees F at 150 psi Inlet and outlet piping is 3" weld neck flange Filter has swing arm for removing the head. Shell thickness is .250" Head Thickness is .250" Hydro Test to 195 psi. E...

Air Filter Stainless Steel 304 - IPP# 235284

• Manufacturer: Camfill

Bag in/bag out filter housing Silicone liquid sealing on doors Tested to ASME N510-1995 Prefilter part # 30/30,24" X 24" X 2" Change out bag # 64C X 72 /3G Final filter part # FA 1570A-01-01-08/09 Change out bag ...

Wiped/Thin Film Evaporator - IPP# 82182

• Manufacturer: Luwa SMS

6-blade Luwa evaporator rotor only.