Category

Country

  • 3/16" NAKASHIMADA PF-420 2 DIE 3 BLOW COLD HEADER

    • Manufacturer: PPM

      equipped with: pko 2nd & 3rd punches electrics: 220/440v / 60hz / 3 phase | max. diameter: 3/16" (4mm) | max. shank length: 3/4" (20mm) | max. cutoff length: 1" (25mm) | maximum production: variable to 200 ppm

      No price
      Ivyland, PA, USA
    • 7/64" NAKASHIMADA MF-220 2 DIE 3 BLOW COLD HEADER

      • Manufacturer: PPM
      • Weight: 5,000 LBS (2,300 KGS)

      equipped with: bush co pko in all punches dual plane wire straightener oil micro separator vari speed drive dm monitor end of coil shut off

      No price
      Ivyland, PA, USA
    • #10 E.W. MENN GW-63 THREAD ROLLER

      • Manufacturer: PPM

        equipped with: new 1985 with 32'' bowl speeds: 250-480 ppm | electrics: 480v / 60hz / 3 phase | diameter range: 1/8" - 5/16" (3mm - 8mm) | maximum blank length: 3-1/8" (80mm) | maximum thread length: 2-1/8" (55mm)

        No price
        Ivyland, PA, USA
      • 7/64" NAKASHIMADA PF-210 2 DIE 3 BLOW COLD HEADER

        • Manufacturer: PPM
        • Weight: 2,500 LBS.

        equipped with: reconditioned by nakashimada 2010 dead point monitor double knife co pko 2nd & 3rd

        No price
        Ivyland, PA, USA
      • BUENDGENS UDR STRAIGHTENING & HOT PARTING MACHINE

        • Manufacturer: PPM

          equipped with: machine has less then 50 hours production time chiller included additional arbor

          No price
          Ivyland, PA, USA
        • CHUN ZU TYPE NA24B NUT ASSEMBLY MACHINE

          • Manufacturer: PPM
          • Weight: 1765 LBS

          size (cm): 210 x 140 x 150 cm | main motor: 3 hp | max. nut size: m12 - m16 | approx. weight: 1765 lbs | max. nut size 2: 1/2" - 5/8" | max. production: 130 ppm

          No price
          Ivyland, PA, USA
        • CHUN ZU TYPE NA19B NUT ASSEMBLY MACHINE

          • Manufacturer: PPM
          • Weight: 1325 LBS

          main motor: 2hp 6ph | max output: 160 ppm | nut size max: 3/8 - 1/2" | max. nut size: m10 - m12 | approx. weight: 1325 lbs | approx size (cm): 194 x 136 x 142cm

          No price
          Ivyland, PA, USA
        • #10 SANMEI TH1-10R EVOLUTION THREAD ROLLER

          • Manufacturer: PPM
          • Weight: 6,000 LBS

          sanmei th1-10r evolution thread roller 6 available maximum diameter: m10 maximum length under head: 75mm maximum thread length: 35mm production speed: 100 - 200 ppm approx. size: 7' x 4' approx. weight: 6,000 lbs

          No price
          Ivyland, PA, USA
        • #10 SANMEI TH1-10R EVOLUTION THREAD ROLLER

          • Manufacturer: PPM
          • Weight: 6,000 LBS

          approx. size: 9' x 4' x 6 high | approx. weight: 6,000 lbs | maximum diameter: m10 | production speed: 100 - 200 ppm | maximum thread length: 35mm | maximum length under head: 75mm

          No price
          Ivyland, PA, USA
        • #10 SANMEI TH1-10R EVOLUTION THREAD ROLLER

          • Manufacturer: PPM
          • Weight: 6,000 LBS

          approx. size: 9' x 4' x 6' high | approx. weight: 6,000 lbs | maximum diameter: m10 | production speed: 100 - 200 ppm | maximum thread length: 35mm | maximum length under head: 75mm

          No price
          Ivyland, PA, USA